Pittsburgh Crew < You
Senior Member
Joined: 03-23-10
Posts: 1,140
Likes: 0
From: Pittsburgh, PA
Anyone heading to PRP Thursday? Will be there in my '64 Ford F100. May have someone drive up my Cobalt too, but probably not. Ran it once when it had 900 miles on it, only thing that has changed is wheels/tires.
Senior Member
Joined: 06-08-05
Posts: 18,529
Likes: 1
From: Pittsburgh
Wes is taking my car up, and I think there are a few more headed up as well.
Finally received all my parts for clutch install. Im going with the Spec stage 3 for road racing with the Spec Aluminum flywheel. I got the new LNF slave ,and pipe and bleeder fitting. New bolts and ZZP adjustable rod. Putting in a new LSD TRANS and will keep the old one as a spare. The dealer is doing the labor. Going in next week
Last edited by mongorat427; May 11, 2011 at 02:58 PM.
New Member
Joined: 05-05-11
Posts: 58
Likes: 0
From: Myrtle Beach, SC
Mark whats up! Me and the gf are heading up, but probably bringing her SS up since my TBSS isnt ready and gas is crazy
Senior Member
Joined: 03-23-10
Posts: 1,140
Likes: 0
From: Pittsburgh, PA
Not much bro. I will be in an old blue Ford pickup with white wheels, stop by and say hi. I'm going to be ripping up the track to the tune of mid 16's if I'm lucky lol.
New Member
Joined: 05-05-11
Posts: 58
Likes: 0
From: Myrtle Beach, SC
I was up for a lil then gf got sick and we had to go right after the orange pro mod camaro ran. Mark i saw you in the truck but didnt have a chance to come and talk.. Next time..
I cant believe i missed the camaro!
I cant believe i missed the camaro!
Senior Member
Joined: 03-23-10
Posts: 1,140
Likes: 0
From: Pittsburgh, PA
Truck went a 16.0@82 uncorrected off the street hot, with the timing way too far advanced (pushing 50 degrees total). The distributor has a terrible advance curve, we didn't think it was fully advancing so we purposely set it aggressive so I could back it off and watch the truck pick up mph. Unfortunately they shut the track down at the first sign of lightning. Next time. I really think this truck has a 15.2 or so in it once I curve the distributor and get some semi-decent air. Will run it next Thursday, then it is time for heads/cam and maybe a small shot.
Truck went a 16.0@82 uncorrected off the street hot, with the timing way too far advanced (pushing 50 degrees total). The distributor has a terrible advance curve, we didn't think it was fully advancing so we purposely set it aggressive so I could back it off and watch the truck pick up mph. Unfortunately they shut the track down at the first sign of lightning. Next time. I really think this truck has a 15.2 or so in it once I curve the distributor and get some semi-decent air. Will run it next Thursday, then it is time for heads/cam and maybe a small shot.
Senior Member
Joined: 03-23-10
Posts: 1,140
Likes: 0
From: Pittsburgh, PA
What does it fit? Truck has 351W. Definitely interested if that's what it is for, was going to put pertronix guts in it anyway, would rather have the HEI.
FORD 351w Windsor Sbf HEI DISTRIBUTOR COIL Blue New | eBay
Heres the ones we use.
FORD 351w Windsor Sbf HEI DISTRIBUTOR COIL Blue New | eBay
13.0 at 100? Were you hitting the brakes before the finish? Mph seems really low for the ET, lol. Truck has more in it, we only had one run, had way too much timing in it (fighting with the factory's horrendous advance curve).
What does it fit? Truck has 351W. Definitely interested if that's what it is for, was going to put pertronix guts in it anyway, would rather have the HEI.
What does it fit? Truck has 351W. Definitely interested if that's what it is for, was going to put pertronix guts in it anyway, would rather have the HEI.
FORD 351w Windsor Sbf HEI DISTRIBUTOR COIL Blue New | eBay
Last edited by mongorat427; May 13, 2011 at 02:27 PM. Reason: Automerged Doublepost
13.0 at 100? Were you hitting the brakes before the finish? Mph seems really low for the ET, lol.
It was a heavy mother with a home built 427 in it. I used a 366 crank and rods, 454 block and L88 pistons with half the dome cut off . Heads were 1970 454 closed chamber ported with 2.25 and 1.88 valves. Ran the factory 2nd design L88 cam with an ATI 3500 stall and 373 gears
Truck has more in it, we only had one run, had way too much timing in it (fighting with the factory's horrendous advance curve).
What does it fit? Truck has 351W. Definitely interested if that's what it is for, was going to put pertronix guts in it anyway, would rather have the HEI.
It was a heavy mother with a home built 427 in it. I used a 366 crank and rods, 454 block and L88 pistons with half the dome cut off . Heads were 1970 454 closed chamber ported with 2.25 and 1.88 valves. Ran the factory 2nd design L88 cam with an ATI 3500 stall and 373 gears
Truck has more in it, we only had one run, had way too much timing in it (fighting with the factory's horrendous advance curve).
What does it fit? Truck has 351W. Definitely interested if that's what it is for, was going to put pertronix guts in it anyway, would rather have the HEI.
Senior Member
Joined: 03-23-10
Posts: 1,140
Likes: 0
From: Pittsburgh, PA
Thanks for posting that up. Seems way too cheap though, the cheapest I have seen one for in Summit was like ~130. Have you used their distributors before? Hell, for 50 bucks it's worth a try.
Believe it or not its the same one Summit sells. I sold 200 of them in the last 4 years and they work. They have an adjustable vacumn advance. Ill be putting in another order in 2 weeks for Parts A Rama if you want to look at one first. I usually get 2 cases of Chevys and a couple Fords.
