dent in door
#1
Senior Member
Thread Starter
Join Date: 05-15-08
Location: Omaha, Nebraska
Posts: 2,262
Likes: 0
Received 0 Likes
on
0 Posts
dent in door
So my friend was opening the passenger side door when he opened it went right into another door that was open on a explorer. The dent is about a inch and a half tall and two and a half to three inches long and I was wanting to know if there is an easy way to get it out with out going somewhere to fix it?
#5
Senior Member
If its creased,meaning a sharp corner almost impossible to get out with out being able to see it.
If its a push in dent you should be able to work it out from the inside but dont be in a hurry.
My advice:
Call a dent king guy or ask the dealer what company they use,if you have the door interior off for him it might be as low as $50.00 if all he has to do is come over and fix it.And you can make your buddy pay.
They have all the special tools for getting behing the crash bar etc.Well worth it.
If its a push in dent you should be able to work it out from the inside but dont be in a hurry.
My advice:
Call a dent king guy or ask the dealer what company they use,if you have the door interior off for him it might be as low as $50.00 if all he has to do is come over and fix it.And you can make your buddy pay.
They have all the special tools for getting behing the crash bar etc.Well worth it.
#8
Senior Member
Join Date: 09-01-05
Location: Delaware
Posts: 2,382
Likes: 0
Received 0 Likes
on
0 Posts
The Ding King
As seen on TV
lol
Well, i bought one, ill let you know how it works when I get it and try to repair my damage.
If you can upload a photo, youll get better answers!
As seen on TV
lol
Well, i bought one, ill let you know how it works when I get it and try to repair my damage.
If you can upload a photo, youll get better answers!
#9
Senior Member
Thread Starter
Join Date: 05-15-08
Location: Omaha, Nebraska
Posts: 2,262
Likes: 0
Received 0 Likes
on
0 Posts
If its creased,meaning a sharp corner almost impossible to get out with out being able to see it.
If its a push in dent you should be able to work it out from the inside but dont be in a hurry.
My advice:
Call a dent king guy or ask the dealer what company they use,if you have the door interior off for him it might be as low as $50.00 if all he has to do is come over and fix it.And you can make your buddy pay.
They have all the special tools for getting behing the crash bar etc.Well worth it.
If its a push in dent you should be able to work it out from the inside but dont be in a hurry.
My advice:
Call a dent king guy or ask the dealer what company they use,if you have the door interior off for him it might be as low as $50.00 if all he has to do is come over and fix it.And you can make your buddy pay.
They have all the special tools for getting behing the crash bar etc.Well worth it.
haha wanted to but i need him to pay it first
that would be cool and i will see if i can get some pics up today
Last edited by cobalt_ss187; 10-13-2008 at 12:55 PM. Reason: Automerged Doublepost
#11
Senior Member
Join Date: 03-12-07
Location: Columbus, Ohio
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
So my friend was opening the passenger side door when he opened it went right into another door that was open on a explorer. The dent is about a inch and a half tall and two and a half to three inches long and I was wanting to know if there is an easy way to get it out with out going somewhere to fix it?
#13
Original Hayden Fanatic
Platinum Member
WTF, I hope your kidding... Really, ask your dealer who they use for paintless dent repair and make your friend pay for it.
Don't people look at the car next to them and make sure no one is in it, or opening a door before they open there door?
Don't people look at the car next to them and make sure no one is in it, or opening a door before they open there door?
Last edited by REIGN SS; 10-13-2008 at 04:52 PM. Reason: Automerged Doublepost
#14
Senior Member
Join Date: 03-12-07
Location: Columbus, Ohio
Posts: 1,586
Likes: 0
Received 0 Likes
on
0 Posts
#15
Member
Join Date: 03-20-07
Location: Kilmarnock, Virginia
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
If its creased,meaning a sharp corner almost impossible to get out with out being able to see it.
If its a push in dent you should be able to work it out from the inside but dont be in a hurry.
My advice:
Call a dent king guy or ask the dealer what company they use,if you have the door interior off for him it might be as low as $50.00 if all he has to do is come over and fix it.And you can make your buddy pay.
They have all the special tools for getting behing the crash bar etc.Well worth it.
If its a push in dent you should be able to work it out from the inside but dont be in a hurry.
My advice:
Call a dent king guy or ask the dealer what company they use,if you have the door interior off for him it might be as low as $50.00 if all he has to do is come over and fix it.And you can make your buddy pay.
They have all the special tools for getting behing the crash bar etc.Well worth it.
GTO 1
#16
Senior Member
Thread Starter
Join Date: 05-15-08
Location: Omaha, Nebraska
Posts: 2,262
Likes: 0
Received 0 Likes
on
0 Posts
ya my friend is an ass!
#17
post pics!
Thread
Thread Starter
Forum
Replies
Last Post