Does Anyone Know How To Do a Crankcase Relearn With HPT
Thread Starter
Senior Member
Joined: 09-05-07
Posts: 10,662
Likes: 0
From: Sasebo Japan
Does Anyone Know How To Do a Crankcase Relearn With HPT
someone help please lol
come on...not one person..
haha...this is great..
come on...not one person..
haha...this is great..
Last edited by Raven SS; May 16, 2008 at 08:54 PM. Reason: Automerged Doublepost
yes
CASE Learn: To use the CASE learn function please follow these steps:
Put the vehicle into park (auto) or neutral (manual).
Turn off all accessories and A/C.
Turn the vehicle off.
Apply the parking brake.
Press the brake pedal. Keep the brake pedal depressed during the entire procedure. REQUIRED for successful test completion
Start the vehicle and let it idle.
Press Begin.
Gradually rev the vehicle to fuel cutoff (around 4000-5000 RPM's) over a period of about 4 seconds. When fuel cuts out, immediately release the throttle.
Allow the engine to come back to an idle.
Turn the ignition off for at least 15 seconds. This step is required for the VCM to store the newly learned configuration.
CASE Learn: To use the CASE learn function please follow these steps:
Put the vehicle into park (auto) or neutral (manual).
Turn off all accessories and A/C.
Turn the vehicle off.
Apply the parking brake.
Press the brake pedal. Keep the brake pedal depressed during the entire procedure. REQUIRED for successful test completion
Start the vehicle and let it idle.
Press Begin.
Gradually rev the vehicle to fuel cutoff (around 4000-5000 RPM's) over a period of about 4 seconds. When fuel cuts out, immediately release the throttle.
Allow the engine to come back to an idle.
Turn the ignition off for at least 15 seconds. This step is required for the VCM to store the newly learned configuration.
Thread
Thread Starter
Forum
Replies
Last Post
SS_SC_Cobalt
2.0L LSJ Performance Tech
79
Dec 15, 2021 03:55 PM
agentirons
Electronics, Audio, and Video
2
Oct 16, 2015 02:11 AM