problem log
Thread Starter
Senior Member
iTrader: (4)
Joined: 12-15-07
Posts: 13,998
Likes: 1
From: Manama, Bahrain
mods are
deki 60's inj
ford lightning fmic
2.7 pulley with gates oversize belt tensioner
cooling mist basic meth kit m5 size with a custom 1gal tank
tb spacer from ottp.
zzp 3" cai with specter dry air filter
dual end plate
innovative WB, interceptor
imma try 2 keep it cohersive and short at the same time or try to.
friday took car to shauns to get tuned.
-meth nozzle clogged
-one pcm needed credits to be tuned switched to another pcm
forgot to unplug batt, as we plug in the pcm something sparked.
-coundnt fin the tune due to meth not working went home p2100
popped on the way home.
- suspected intercooler not working due to high iat2 temps
few days after
- put stock parts back in along with the other pcm , no codes for 5 days
more few days after
- checked the meth set up found clog at the nozzle
- ic pump is working
- installed mods again
- p2100 came back up after putting the flashed pcm
next day took it back to get tuned.
-p2100 gone
-meth was partialy clogged
-o2 front sensor gave out
-car was running 9afr on idle even after it was trimmed -40points twice.
-p0507 came around on my way home
-i wired the meth to be on even out of boost and it only worked at
the bottom of the pull
- when you turn off the car it takes 5secs after the key is turned
- the car lugs when starting.
following day
- flushed the system with lime away and distilled water to get rid of the calcium build up on the system.
- checked every inch of the meth i need to change the connectors on the boost solenoid its loose and it prolly gets bad connection when the car vibrates on wot
-it have turned off on me while driving and i come to the light and just died on me, had 2 start it a few times and rev it up so it will not die.
imma go n change the front o2 here in a bit and see if that helps with the fueling?
so far thats whats happening with the car.
deki 60's inj
ford lightning fmic
2.7 pulley with gates oversize belt tensioner
cooling mist basic meth kit m5 size with a custom 1gal tank
tb spacer from ottp.
zzp 3" cai with specter dry air filter
dual end plate
innovative WB, interceptor
imma try 2 keep it cohersive and short at the same time or try to.
friday took car to shauns to get tuned.
-meth nozzle clogged
-one pcm needed credits to be tuned switched to another pcm
forgot to unplug batt, as we plug in the pcm something sparked.
-coundnt fin the tune due to meth not working went home p2100
popped on the way home.
- suspected intercooler not working due to high iat2 temps
few days after
- put stock parts back in along with the other pcm , no codes for 5 days
more few days after
- checked the meth set up found clog at the nozzle
- ic pump is working
- installed mods again
- p2100 came back up after putting the flashed pcm
next day took it back to get tuned.
-p2100 gone
-meth was partialy clogged
-o2 front sensor gave out
-car was running 9afr on idle even after it was trimmed -40points twice.
-p0507 came around on my way home
-i wired the meth to be on even out of boost and it only worked at
the bottom of the pull
- when you turn off the car it takes 5secs after the key is turned
- the car lugs when starting.
following day
- flushed the system with lime away and distilled water to get rid of the calcium build up on the system.
- checked every inch of the meth i need to change the connectors on the boost solenoid its loose and it prolly gets bad connection when the car vibrates on wot
-it have turned off on me while driving and i come to the light and just died on me, had 2 start it a few times and rev it up so it will not die.
imma go n change the front o2 here in a bit and see if that helps with the fueling?
so far thats whats happening with the car.
Thread
Thread Starter
Forum
Replies
Last Post
Sl0wbaltSS
2.0L LNF Performance Tech
18
Nov 21, 2018 11:11 PM



