Latrodectus: New Paint
Thread Starter
Junior Member
Joined: 04-26-05
Posts: 446
Likes: 0
From: Glendale, Arizona
Latrodectus: New Paint
I just got her back in the garage from the paint shop:
No... it's not really black, it just looks black.
You can kind of see the sparklies in this picture, but for some reason it comes out red, in reality it looks more golden brown.
More sparklies.
Without direct light on it, the car still looks black, out in the sunlight you can really see the sparkles. They're called diamond sparkles, so it's primarily a golden sparkle (through the rootbeer color) with hints of red and green.
No... it's not really black, it just looks black.
You can kind of see the sparklies in this picture, but for some reason it comes out red, in reality it looks more golden brown.
More sparklies.
Without direct light on it, the car still looks black, out in the sunlight you can really see the sparkles. They're called diamond sparkles, so it's primarily a golden sparkle (through the rootbeer color) with hints of red and green.
Thread Starter
Junior Member
Joined: 04-26-05
Posts: 446
Likes: 0
From: Glendale, Arizona
Thanks. It does look better in person... maybe I just need someone that knows more than "Point and Click" to photograph it 
The engine goes back in this Saturday, then it's off to Metal Man's place to have some new custom parts made. I hope to get it back around mid March.
BTW, if you're looking for custom metal work (Exhaust, Headers, Cold Air Intakes, etc...) MetalMan does awesome work. http://www.metalmanfab.com
The engine goes back in this Saturday, then it's off to Metal Man's place to have some new custom parts made. I hope to get it back around mid March.
BTW, if you're looking for custom metal work (Exhaust, Headers, Cold Air Intakes, etc...) MetalMan does awesome work. http://www.metalmanfab.com
Thread Starter
Junior Member
Joined: 04-26-05
Posts: 446
Likes: 0
From: Glendale, Arizona
Originally Posted by shcwv
how much it cost?
I had actually sanded it down myself and painted it, which came out ok, but the paint wasn't as dark as what I wanted, even out of direct light you could tell it was brown, and in sunlight it was the color of an A&W rootbeer can. I screwed up the paint when I tried to apply some dark translucent paint over it to darken it up. The paint wrinkled in patches all over the place (I sanded the clear coat too thin).
So I ended up having Performance Dodge in town sand it back down and paint it. This time having the paint shop do spray-outs rather than relying on a stupid little sample on a white sheet of paper (the white background makes it look darker than it is). And the labor cost a bunch, especially when they have to sand it as much as they did because of the wrinkled paint. It ran about $4k for them to fix my mistake and repaint it, and it's a difficult paint to shoot: 3 coats of Black metalic w/ the diamond flake in it, 5 coats of Candy Rootbeer and then 3 coats of Clear.
Senior Member
Joined: 07-06-04
Posts: 2,082
Likes: 2
From: Spaceball 1 or better known as CT
Originally Posted by mchat
The paint itself was relatively inexpensive, nothing like the $2k per gallon like the true Chameleon paint.
I had actually sanded it down myself and painted it, which came out ok, but the paint wasn't as dark as what I wanted, even out of direct light you could tell it was brown, and in sunlight it was the color of an A&W rootbeer can. I screwed up the paint when I tried to apply some dark translucent paint over it to darken it up. The paint wrinkled in patches all over the place (I sanded the clear coat too thin).
So I ended up having Performance Dodge in town sand it back down and paint it. This time having the paint shop do spray-outs rather than relying on a stupid little sample on a white sheet of paper (the white background makes it look darker than it is). And the labor cost a bunch, especially when they have to sand it as much as they did because of the wrinkled paint. It ran about $4k for them to fix my mistake and repaint it, and it's a difficult paint to shoot: 3 coats of Black metalic w/ the diamond flake in it, 5 coats of Candy Rootbeer and then 3 coats of Clear.
I had actually sanded it down myself and painted it, which came out ok, but the paint wasn't as dark as what I wanted, even out of direct light you could tell it was brown, and in sunlight it was the color of an A&W rootbeer can. I screwed up the paint when I tried to apply some dark translucent paint over it to darken it up. The paint wrinkled in patches all over the place (I sanded the clear coat too thin).
So I ended up having Performance Dodge in town sand it back down and paint it. This time having the paint shop do spray-outs rather than relying on a stupid little sample on a white sheet of paper (the white background makes it look darker than it is). And the labor cost a bunch, especially when they have to sand it as much as they did because of the wrinkled paint. It ran about $4k for them to fix my mistake and repaint it, and it's a difficult paint to shoot: 3 coats of Black metalic w/ the diamond flake in it, 5 coats of Candy Rootbeer and then 3 coats of Clear.
Thread Starter
Junior Member
Joined: 04-26-05
Posts: 446
Likes: 0
From: Glendale, Arizona
Yea, I hope to get it out in the sun and dust it off to take some pics after the engine install this weekend. Hopefully the sun will allow the color to show up in the pictures.
Senior Member
Joined: 12-31-05
Posts: 8,269
Likes: 0
From: Michigan
sweet, i am a cheap ass and I just buy the spray on tint for my paint job. Looks really really sweet and no one ever notices it is spray on..... until it rains and goes away haha
nice ride..... it is starting to look nothing like a neon which IMO is a good thing
nice ride..... it is starting to look nothing like a neon which IMO is a good thing
Thread Starter
Junior Member
Joined: 04-26-05
Posts: 446
Likes: 0
From: Glendale, Arizona
Originally Posted by phxSS
When are you gonna hit 11's? And your new engine blew already? didn't you just get your new motor last month?
And 11's have been hit since I put the turbo on in July. Best run was an 11.37@127; will be aiming for at least low 10's w/ the new engine.
Thread
Thread Starter
Forum
Replies
Last Post
camaromanss1992
Parts
3
Oct 1, 2015 10:51 PM
