16psi + C16 + 150shot + 22* timing = Z06 Killer :-)
#301
Senior Member
Join Date: 07-17-07
Location: right behind you.
Posts: 9,378
Likes: 0
Received 0 Likes
on
0 Posts
i guess morals come with intelligence. I'm truly sorry you got the short end of both. Seriously, what if the next owner has major problems with the engine and they get fucked on the warranty because of you? You could **** someones credit and screw their whole life up. that's messed up.
#302
Senior Member
Join Date: 01-24-07
Location: Hopkinsville, KY
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
i guess morals come with intelligence. I'm truly sorry you got the short end of both. Seriously, what if the next owner has major problems with the engine and they get fucked on the warranty because of you? You could **** someones credit and screw their whole life up. that's messed up.
#303
Senior Member
Join Date: 07-17-07
Location: right behind you.
Posts: 9,378
Likes: 0
Received 0 Likes
on
0 Posts
full of **** that i wouldn't turn in a car that was sprated with a 200 hsot? not really. I wouldn't. I am not trying to **** over other people. If i were to sell a carr that was sprayed it would be privately sold and i would tell the buyer. In fact, when i sold my v6 mstang, i gave the buyer my forum name on multiple forums and gave him all receipts and records for any modificatios. he still calls me to ask questions about stuff.
#304
Senior Member
Join Date: 01-24-07
Location: Hopkinsville, KY
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
I did the same thing with both GTOs I traded. Infact the '04 was bought by a guy who works in the unit next to mine. I made sure he knew every thing. I have yet to see a car dealership sell a car with a warranty that has not been thoroughly inspected. Cars that do not meet the standard are whole-saled at auction.
Last edited by aja342; 08-09-2008 at 11:03 AM.
#305
New Member
Join Date: 02-18-06
Location: Ahead of you!
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
My take on this is the Z06 driver needs some more practice on driving. I also say his dyno numbers are inflated. Dyno Dynamic dynos like the one he dynoed on in the video are easy to fudge a correction factor on. Plus owning a Z06 I was running 11.6@119 mph Cam only at 423 rwhp. If he is making 450 rwhp his trap speed should be around 122. And let me say I trap 127-128 right now on 485 rwhp. And here are some videos of what my car sounds like. http://videos.streetfire.net/video/2...deo_158472.htm
http://videos.streetfire.net/video/Z...ideo_98653.htm
http://videos.streetfire.net/video/Z...ideo_98653.htm
#308
i guess morals come with intelligence. I'm truly sorry you got the short end of both. Seriously, what if the next owner has major problems with the engine and they get fucked on the warranty because of you? You could **** someones credit and screw their whole life up. that's messed up.
you know darksun his cobalt that thing he told me went through hell and he just brought it back
#309
Senior Member
Join Date: 07-30-06
Location: Indiana
Posts: 1,183
Likes: 0
Received 0 Likes
on
0 Posts
u act like he is the only one trading a car in thats been beat. dude this happens every day some kid around my area trades in a car that has been beat to ****. that is why people think twice about buying a boosted car used. most of them a beat to ****.
you know darksun his cobalt that thing he told me went through hell and he just brought it back
you know darksun his cobalt that thing he told me went through hell and he just brought it back
I also wouldnt dick someone over by leasing or trading in a car without informing them what was done to it.
#310
Senior Member
Join Date: 05-17-06
Location: Ft. Eustis, VA
Posts: 7,283
Likes: 0
Received 0 Likes
on
0 Posts
Beating on a car and spraying a car is totally different. Nitrous is extremely hard on a motor and 200shot is just stupid. Whether the car acted like it or not I would almost put money down that there was damage to the motor. I honestly dont know of any production motor that you car spray a 200shot on safely.
I also wouldnt dick someone over by leasing or trading in a car without informing them what was done to it.
I also wouldnt dick someone over by leasing or trading in a car without informing them what was done to it.
#311
Senior Member
Join Date: 07-30-06
Location: Indiana
Posts: 1,183
Likes: 0
Received 0 Likes
on
0 Posts
Hence why I said safely. I know the 03/04 Cobras cant take that big of a shot and neither can LSX motrs. On most cars 150shot or less is the safe area. Yes you can push more but then its a ticking time bomb. A 200shot is extremely abusive and puts a ton of strain on the internals and overtime the repeated stress finally causes something to break.
#312
Senior Member
Join Date: 05-17-06
Location: Ft. Eustis, VA
Posts: 7,283
Likes: 0
Received 0 Likes
on
0 Posts
Hence why I said safely. I know the 03/04 Cobras cant take that big of a shot and neither can LSX motrs. On most cars 150shot or less is the safe area. Yes you can push more but then its a ticking time bomb. A 200shot is extremely abusive and puts a ton of strain on the internals and overtime the repeated stress finally causes something to break.
#313
Senior Member
Join Date: 08-20-07
Location: Irwin, Pa (S of Pittsburgh)
Posts: 2,061
Likes: 0
Received 0 Likes
on
0 Posts
#314
Sorry but the white lane lines will blur above 125, so you never got past 125. And, the vette was, by the lack of sound, not getting on it at all. And if you can take second gear to 80 you've done a gear change or you've done the dumb thing and bumped your fuelcut\redline to 8000 rpm. Either way that was not even close to 150, so stop dreaming.
No one, no one in their right mind puts a 150 shot on a four banger without internal modds, NO ONE! So yes alot of this is BS. I also believe that may have been a stock C5 not a C5 Z06.
No one, no one in their right mind puts a 150 shot on a four banger without internal modds, NO ONE! So yes alot of this is BS. I also believe that may have been a stock C5 not a C5 Z06.
#315
Sorry but the white lane lines will blur above 125, so you never got past 125. And, the vette was, by the lack of sound, not getting on it at all. And if you can take second gear to 80 you've done a gear change or you've done the dumb thing and bumped your fuelcut\redline to 8000 rpm. Either way that was not even close to 150, so stop dreaming.
No one, no one in their right mind puts a 150 shot on a four banger without internal modds, NO ONE! So yes alot of this is BS. I also believe that may have been a stock C5 not a C5 Z06.
No one, no one in their right mind puts a 150 shot on a four banger without internal modds, NO ONE! So yes alot of this is BS. I also believe that may have been a stock C5 not a C5 Z06.
my sisters camera is a point and shoot camera but it was expensive like all hell and when you take video's it doesn't blur what so ever. and when you do roll races it almost looks like your going slower than you really are because it has so many megapixels and the resolution is so high. high quality basically. if you have a junky camera that has low resolution in video's it will seem really fast high speeds cause it starts to blur.
also he is running a 150shot. you sir fail again
#316
Banned
Thread Starter
Join Date: 02-23-06
Location: Mo-town, WV
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
Sorry but the white lane lines will blur above 125, so you never got past 125. And, the vette was, by the lack of sound, not getting on it at all. And if you can take second gear to 80 you've done a gear change or you've done the dumb thing and bumped your fuelcut\redline to 8000 rpm. Either way that was not even close to 150, so stop dreaming.
No one, no one in their right mind puts a 150 shot on a four banger without internal modds, NO ONE! So yes alot of this is BS. I also believe that may have been a stock C5 not a C5 Z06.
No one, no one in their right mind puts a 150 shot on a four banger without internal modds, NO ONE! So yes alot of this is BS. I also believe that may have been a stock C5 not a C5 Z06.
It was a C5 Z06. I'm sorry, but a stock C5, C6, or even a stock C5 Z06 would have taken the same god damn beating. Enough ******* bullshit. And yes I spray a 150shot on a stock "4-banger" if you will. The jets in my car are .057 and .029 for reference. This leans me to a 10.5 AFR, which is safe by my standards using nitrous. How are you not grasping this concept when on a 75 shot I have DYNO PROOF of my car doing 335whp/350ft.lbs. of torque on 93 octane and off the bottle in that very same 10 minute time span of dyno runs I made 250whp and 235ft.lbs. of torque on 93 octane. Throw C16 into the mix and double the shot and I will guarantee I am making every bit of 420-430whp. I'm sure it does harm the bearings in the bottom end. Sue me and then get a life!
#317
Wow. You are a complete moron. I have datalogged proof of my car hitting 140 lol. And I also have datalogged proof of my car redlining at 7500rpm hitting 80mph. Go back to middle school and learn a little about physics and math and you will see that a 25.7" tire with a 7500 rpm redline on our stock second gear ratio and 4.05 final drive and you will hit 80mph, both on paper AND in the car.
It was a C5 Z06. I'm sorry, but a stock C5, C6, or even a stock C5 Z06 would have taken the same god damn beating. Enough ******* bullshit. And yes I spray a 150shot on a stock "4-banger" if you will. The jets in my car are .057 and .029 for reference. This leans me to a 10.5 AFR, which is safe by my standards using nitrous. How are you not grasping this concept when on a 75 shot I have DYNO PROOF of my car doing 335whp/350ft.lbs. of torque on 93 octane and off the bottle in that very same 10 minute time span of dyno runs I made 250whp and 235ft.lbs. of torque on 93 octane. Throw C16 into the mix and double the shot and I will guarantee I am making every bit of 420-430whp. I'm sure it does harm the bearings in the bottom end. Sue me and then get a life!
It was a C5 Z06. I'm sorry, but a stock C5, C6, or even a stock C5 Z06 would have taken the same god damn beating. Enough ******* bullshit. And yes I spray a 150shot on a stock "4-banger" if you will. The jets in my car are .057 and .029 for reference. This leans me to a 10.5 AFR, which is safe by my standards using nitrous. How are you not grasping this concept when on a 75 shot I have DYNO PROOF of my car doing 335whp/350ft.lbs. of torque on 93 octane and off the bottle in that very same 10 minute time span of dyno runs I made 250whp and 235ft.lbs. of torque on 93 octane. Throw C16 into the mix and double the shot and I will guarantee I am making every bit of 420-430whp. I'm sure it does harm the bearings in the bottom end. Sue me and then get a life!
#318
Senior Member
Join Date: 07-05-08
Location: Nebraska
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
StreetDreamz let it go already.
Even if you were making the numbers you say you "should" be making you wouldn't beat a C5 Z06 making the same power.
Take your rocket powered car and run some low 11's otherwise shut the hell up.
Even if you were making the numbers you say you "should" be making you wouldn't beat a C5 Z06 making the same power.
Take your rocket powered car and run some low 11's otherwise shut the hell up.
#320
Banned
Thread Starter
Join Date: 02-23-06
Location: Mo-town, WV
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
It's a C5 Z06 with an LS6. It has a Magnaflow exhaust, some kind of headers, some sort of cam that definitely has the car rocking at idle, an intake, and he does his own tuning. It laid down 453whp the same day my car laid down 250whp off the bottle. I don't think that's a very inflated dyno number if you ask me. Weight advantage? Yes. He had a 170lb passenger also. I'd say there was a 400lb weight swing.
Last edited by StreetDreamz; 08-11-2008 at 01:30 PM.
#321
Senior Member
Join Date: 05-13-08
Location: up my own ass
Posts: 2,050
Likes: 0
Received 0 Likes
on
0 Posts
i love it. i have the 3 inch whisper resonator on it so it a shitload quieter and now i dont get hassled by the popo any more. i love the higher rpm power and also when i was stock pulley it would completely lose traction in first at any rpm until like 5 grand. it is great for the power and driving i do and want.
#324
Banned
Thread Starter
Join Date: 02-23-06
Location: Mo-town, WV
Posts: 1,287
Likes: 0
Received 0 Likes
on
0 Posts
#325
Senior Member
Join Date: 07-05-08
Location: Nebraska
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
And it wouldn't matter if it was the 385hp LS6 or 405HP LS6 because all of his mods replaced what was different between the two anyway.