CSS Style aggressive fitment thread! Part 2
#106
Senior Member
iTrader: (5)
some guy with a red one is running the rims i have on his with a spacer as they dont clear the brembos
Wheels: Focal F163 Gunmetal 18x8
Wheels: 42mm offset 22.5lbs
Tires: BFG G-Force T/A KD 225/40ZR18
Drop: 0
Wheel spacers: 5/16 front, 3mm rear
Hubcentric rings: 72.62mm to 65.10mm
Stock wheel studs with tuner lugs - 12mmx1.50
Wheel lug holes are drilled to 5/8 to fit tuner lugs.
Installation: Wheels wont clear SS/TC calipers without the 5/16 front wheel spacers. These wheel spacers require the tuner lug nut, because there is not enough thread left on the stock wheel studs for a stock lug nut. There is a light rub between the tire and the inner fender during turning, due to the use of the wheel spacers.
Next: Looking for a modification to eliminate the massive understeer.
Wheels: Focal F163 Gunmetal 18x8
Wheels: 42mm offset 22.5lbs
Tires: BFG G-Force T/A KD 225/40ZR18
Drop: 0
Wheel spacers: 5/16 front, 3mm rear
Hubcentric rings: 72.62mm to 65.10mm
Stock wheel studs with tuner lugs - 12mmx1.50
Wheel lug holes are drilled to 5/8 to fit tuner lugs.
Installation: Wheels wont clear SS/TC calipers without the 5/16 front wheel spacers. These wheel spacers require the tuner lug nut, because there is not enough thread left on the stock wheel studs for a stock lug nut. There is a light rub between the tire and the inner fender during turning, due to the use of the wheel spacers.
Next: Looking for a modification to eliminate the massive understeer.
#107
Senior Member
iTrader: (7)
Join Date: 01-22-08
Location: Kansas
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
ugh....im going to rub lol ill fix the intake and maybe jsut rock a 12 front and rear and see where it sits. i drive it in all conditions everyday ill be redoing my stcker and getting the plaid trunk done VERY soon gotta fill a tiny ding. anyone know how hard it is?
#114
Senior Member
iTrader: (7)
Join Date: 01-22-08
Location: Kansas
Posts: 2,765
Likes: 0
Received 0 Likes
on
0 Posts
ting-ting i have a picture of someones lbm ss with grey te37s.......zomg... he was the one with the bronze voxx misanos that sold and then ended up getting a redline later....
And how hard is filling dents. tehres some on the top of the trunk. shouldnt be that hard to do myself right? jsut make it smooth? is there a technique and certain process.
And how hard is filling dents. tehres some on the top of the trunk. shouldnt be that hard to do myself right? jsut make it smooth? is there a technique and certain process.
#117
Haz l33t wheelz.
#118
ting-ting i have a picture of someones lbm ss with grey te37s.......zomg... he was the one with the bronze voxx misanos that sold and then ended up getting a redline later....
And how hard is filling dents. tehres some on the top of the trunk. shouldnt be that hard to do myself right? jsut make it smooth? is there a technique and certain process.
And how hard is filling dents. tehres some on the top of the trunk. shouldnt be that hard to do myself right? jsut make it smooth? is there a technique and certain process.