Another Down Cobalt
Senior Member
Joined: 05-20-06
Posts: 5,450
Likes: 0
From: Jacksonville, Florida
Thread Starter
Senior Member
Joined: 09-05-07
Posts: 10,662
Likes: 0
From: Sasebo Japan
i have an aem wideband u think i should switch over? how much u looking at on that build? u already have a meth kit tho huh? do u think an dual pass is worthy of buying right away if i am going meth?
ur gonna go with 272 cams with no retainers or valve springs? and same question for after the porting job?
ur gonna go with 272 cams with no retainers or valve springs? and same question for after the porting job?
Last edited by Raven SS; Dec 3, 2007 at 01:34 PM. Reason: Automerged Doublepost
Rent me! per hour
Joined: 03-22-07
Posts: 24,161
Likes: 20
From: Still fixing others mistakes.
i should have said valvetrain.
keep the wideband, add an egt. wideband would read 11.6 afr, but your temps could be at 1800 degree's and you wouldn't have a clue why it keeps melting ****.
it's more or less a tool i use for timing, and knowing how far i can go with something.
keep the wideband, add an egt. wideband would read 11.6 afr, but your temps could be at 1800 degree's and you wouldn't have a clue why it keeps melting ****.
it's more or less a tool i use for timing, and knowing how far i can go with something.
Thread Starter
Senior Member
Joined: 09-05-07
Posts: 10,662
Likes: 0
From: Sasebo Japan
i should have said valvetrain.
keep the wideband, add an egt. wideband would read 11.6 afr, but your temps could be at 1800 degree's and you wouldn't have a clue why it keeps melting ****.
it's more or less a tool i use for timing, and knowing how far i can go with something.
keep the wideband, add an egt. wideband would read 11.6 afr, but your temps could be at 1800 degree's and you wouldn't have a clue why it keeps melting ****.
it's more or less a tool i use for timing, and knowing how far i can go with something.
Rent me! per hour
Joined: 03-22-07
Posts: 24,161
Likes: 20
From: Still fixing others mistakes.
lol, i could. i haven't been to cali for a couple years actually. not a fun drive from here.
intercepter is fine to have, but i don't have one, i have never had a use for one. i have an egt, boost, and a innovate wideband. if i need more gauge's, i load up the laptop and see whats goin on.
intercepter is fine to have, but i don't have one, i have never had a use for one. i have an egt, boost, and a innovate wideband. if i need more gauge's, i load up the laptop and see whats goin on.
Senior Member
Joined: 04-03-06
Posts: 7,570
Likes: 0
From: Mesa, AZ
Yeh mine happend when I wasted money on Stage II.... GM messed it up, so I got a new engine... totally my fault this time. Mine is sitting in the garage at the moment. Same problem.
Keep em cool... forged pistons are we're straight.
Crank is forged already... good for 500hp and the stock rods are forged and good for about 500hp.... **** GM for givin us shitty pistons. Aside for the fact I didn't do any other cooling mods they might have held up better, so its my fault I suppose. Anyway... thats kinda the same thing I am in the middle of right now... so thats the best advice I can give ya.
I'm going turbo anyway.... and have some stuff for sale... https://www.cobaltss.net/forums/show...50#post1710350
Keep em cool... forged pistons are we're straight.
Crank is forged already... good for 500hp and the stock rods are forged and good for about 500hp.... **** GM for givin us shitty pistons. Aside for the fact I didn't do any other cooling mods they might have held up better, so its my fault I suppose. Anyway... thats kinda the same thing I am in the middle of right now... so thats the best advice I can give ya.
I'm going turbo anyway.... and have some stuff for sale... https://www.cobaltss.net/forums/show...50#post1710350
Stock rods = 400
Thread Starter
Senior Member
Joined: 09-05-07
Posts: 10,662
Likes: 0
From: Sasebo Japan
lol, i could. i haven't been to cali for a couple years actually. not a fun drive from here.
intercepter is fine to have, but i don't have one, i have never had a use for one. i have an egt, boost, and a innovate wideband. if i need more gauge's, i load up the laptop and see whats goin on.
intercepter is fine to have, but i don't have one, i have never had a use for one. i have an egt, boost, and a innovate wideband. if i need more gauge's, i load up the laptop and see whats goin on.
Thread Starter
Senior Member
Joined: 09-05-07
Posts: 10,662
Likes: 0
From: Sasebo Japan
lol, i could. i haven't been to cali for a couple years actually. not a fun drive from here.
intercepter is fine to have, but i don't have one, i have never had a use for one. i have an egt, boost, and a innovate wideband. if i need more gauge's, i load up the laptop and see whats goin on.
intercepter is fine to have, but i don't have one, i have never had a use for one. i have an egt, boost, and a innovate wideband. if i need more gauge's, i load up the laptop and see whats goin on.
Rent me! per hour
Joined: 03-22-07
Posts: 24,161
Likes: 20
From: Still fixing others mistakes.
nope, on the egt and intercepter.
i have more vacation time hitting me up at the first of the year.
bryan, you have my attention now. the gears are turning very fast in my head.
i have more vacation time hitting me up at the first of the year.
bryan, you have my attention now. the gears are turning very fast in my head.
Senior Member
Joined: 08-13-05
Posts: 5,733
Likes: 1
From: the glove
Thread
Thread Starter
Forum
Replies
Last Post