Lysholm 1.6 Twinscrew - En route to power!
09-09-2011, 12:50 AM
#551
New Member
Join Date: 06-05-11
Location: Oshkosh,Wi
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
now im at a stand still i wanted to buy a tvs for a while but what about the m90 ? I want the one that will give me a little over 300whp the quickest way possible. i dont want to waste my time and spend a good amount of money if i cant atleast have 300whp.
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
09-09-2011, 12:58 AM
#552
Banned
iTrader: (1)
Join Date: 04-06-06
Location: Oxnard, CA
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
now im at a stand still i wanted to buy a tvs for a while but what about the MP90? I want the one that will give me a little over 300whp the quickest way possible. i dont want to waste my time and spend a good amount of money if i cant atleast have 300whp.
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
09-09-2011, 11:45 AM
#553
now im at a stand still i wanted to buy a tvs for a while but what about the m90 ? I want the one that will give me a little over 300whp the quickest way possible. i dont want to waste my time and spend a good amount of money if i cant atleast have 300whp.
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
I live 30 mins north of you.
09-09-2011, 12:44 PM
#555
Member
Join Date: 06-21-09
Location: Reading, PA
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
So, pardon the newb-ism, but does Euthanasia have a store front or anything? I'm interested in pricing on one of these kits, and also on his M62 porting from the other thread.
Is the only option to PM him?
Is the only option to PM him?
09-09-2011, 01:13 PM
#556
Yes... have to pm him... uber secret modzzzzzz
I'd get that port of his... even I'm confident I could get the m62 up from my 2.7 and meth tune low reading dyno of 248whp/227ftlbs up in to the 280-290s with the addition of the shorty header, 3" dp n Catback, ls4 tb, 12-14 gph of meth, and this supercharger port on a 2.5 ring.
My car feels so much torqier with this m62 port on 17* of max spark vs the old m62 I had on with 24-25* max
I'd get that port of his... even I'm confident I could get the m62 up from my 2.7 and meth tune low reading dyno of 248whp/227ftlbs up in to the 280-290s with the addition of the shorty header, 3" dp n Catback, ls4 tb, 12-14 gph of meth, and this supercharger port on a 2.5 ring.
My car feels so much torqier with this m62 port on 17* of max spark vs the old m62 I had on with 24-25* max
Last edited by 100% METH; 09-09-2011 at 01:22 PM.
09-09-2011, 01:26 PM
#557
Yes... have to pm him... uber secret modzzzzzz
I'd get that port of his... even I'm confident I could get the m62 up from my 2.7 and meth tune low reading dyno of 248whp/227ftlbs up in to the 280-290s with the addition of the shorty header, 3" dp n Catback, ls4 tb, 12-14 gph of meth, and this supercharger port on a 2.5 ring.
My car feels so much torqier with this m62 port on 17* of max spark vs the old m62 I had on with 24-25* max
I'd get that port of his... even I'm confident I could get the m62 up from my 2.7 and meth tune low reading dyno of 248whp/227ftlbs up in to the 280-290s with the addition of the shorty header, 3" dp n Catback, ls4 tb, 12-14 gph of meth, and this supercharger port on a 2.5 ring.
My car feels so much torqier with this m62 port on 17* of max spark vs the old m62 I had on with 24-25* max
I'm just nervous about screwing around with it. There isn't much info on it other than on the rotors and power it produced, so I'm not 100% sure if Eaton altered anything within the housing to produce better airflow.
09-09-2011, 02:19 PM
#561
Banned
iTrader: (1)
Join Date: 04-06-06
Location: Oxnard, CA
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
You are starting to make me want to get this done to my H62.
I'm just nervous about screwing around with it. There isn't much info on it other than on the rotors and power it produced, so I'm not 100% sure if Eaton altered anything within the housing to produce better airflow.
I'm just nervous about screwing around with it. There isn't much info on it other than on the rotors and power it produced, so I'm not 100% sure if Eaton altered anything within the housing to produce better airflow.
09-09-2011, 03:36 PM
#567
What if the price was priced right... ^^^^^^ <--- see above photo and PM euthanasia for details
Where can you get a...
- ported intake manifold & Single pass IM... Euthanasia
- special heat extracting coating... Euthanasia
- Uber top secret m62 port job... Euthanasia
- Awesome lsj head port job + all valvetrain goodies... Euthanasia (This port job speaks for itself, ask all his customers)
- The one who brought you the unthinkable MP90, MP1900, and Lysholm 1.6 twinscrew... Euthanasia + my wallet
All for a great price
Need I say more? Carry on... Carry on...
Where can you get a...
- ported intake manifold & Single pass IM... Euthanasia
- special heat extracting coating... Euthanasia
- Uber top secret m62 port job... Euthanasia
- Awesome lsj head port job + all valvetrain goodies... Euthanasia (This port job speaks for itself, ask all his customers)
- The one who brought you the unthinkable MP90, MP1900, and Lysholm 1.6 twinscrew... Euthanasia + my wallet
All for a great price
Need I say more? Carry on... Carry on...
Last edited by 100% METH; 09-09-2011 at 03:42 PM.
09-09-2011, 03:45 PM
#568
now im at a stand still i wanted to buy a tvs for a while but what about the MP90 ? I want the one that will give me a little over 300whp the quickest way possible. i dont want to waste my time and spend a good amount of money if i cant atleast have 300whp.
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
i figured 80lb injectors full einch exhuast tvs 3.0 or 2.9 pulley good tune and i should hit 300whp. not sure. Ive been reading up on it for a while but this looks very impressive as well ! now on at a LAWLZ
The m90 es caca <--- EATON
MP90 es not caca <--- Magnuson casing, snout, inlet w/ eaton rotor pack (ES NOT CACA)
09-09-2011, 04:02 PM
#571
Senior Member
iTrader: (1)
Join Date: 02-16-09
Location: New Jersey then. Now Orlando Florida
Posts: 1,595
Likes: 0
Received 0 Likes
on
0 Posts
What if the price was priced right... ^^^^^^ <--- see above photo and PM euthanasia for details
Where can you get a...
- ported intake manifold & Single pass IM... Euthanasia
- special heat extracting coating... Euthanasia
- Uber top secret m62 port job... Euthanasia
- Awesome lsj head port job + all valvetrain goodies... Euthanasia (This port job speaks for itself, ask all his customers)
- The one who brought you the unthinkable MP90, MP1900, and Lysholm 1.6 twinscrew... Euthanasia + my wallet
All for a great price
Need I say more? Carry on... Carry on...
Where can you get a...
- ported intake manifold & Single pass IM... Euthanasia
- special heat extracting coating... Euthanasia
- Uber top secret m62 port job... Euthanasia
- Awesome lsj head port job + all valvetrain goodies... Euthanasia (This port job speaks for itself, ask all his customers)
- The one who brought you the unthinkable MP90, MP1900, and Lysholm 1.6 twinscrew... Euthanasia + my wallet
All for a great price
Need I say more? Carry on... Carry on...
