SC silencer
I'm not to worried at all about the JB Weld falling out after seeing it on the SC and after reading and talking to a bunch of people who have had this done for a year or more. I'm convinced it'll be okay. Here are a few more pics of how things are going. As of this afternoon all i need to do is clean up the sticky residue left over from the tape, and clean the JB on the outside of the casing and put it all back together. (Hoping the leak will seal itself with pressure) I'm thinking my camera takes videos so i'll try to get a video up soon but i don't know when my PCM will show up from TAG so it may be a while. (I'm hoping for tonight though.) Here's the pics:






I'm not to worried at all about the JB Weld falling out after seeing it on the SC and after reading and talking to a bunch of people who have had this done for a year or more. I'm convinced it'll be okay. Here are a few more pics of how things are going. As of this afternoon all i need to do is clean up the sticky residue left over from the tape, and clean the JB on the outside of the casing and put it all back together. (Hoping the leak will seal itself with pressure) I'm thinking my camera takes videos so i'll try to get a video up soon but i don't know when my PCM will show up from TAG so it may be a while. (I'm hoping for tonight though.) Here's the pics:








Just filled the resivoir with oil and i'm letting it set for a while and then rotating the charger to check for leaks in the seal. So far it looks promising and i can't wait to hear this thing scream...
As long as i get my PCM back from TAG. It's all i'm waiting on. I'll have a vid up minutes after i get the comp back. I PROMISE... 
Can someone confirm how much SC Oil it takes. I'm almost positive it's 8 FL. OZ., but would deffinitly would like someone to confirm that.
Can someone confirm how much SC Oil it takes. I'm almost positive it's 8 FL. OZ., but would deffinitly would like someone to confirm that.
Time to bring this thread back alive. I did this mod today, and took a short run after 4 hours of curing time. The second the bypass closes and the car begins using boost, the S/C starts whining. At WOT, it IS loud. I can't wait until tomorrow so that its fully cured.
I definatly wanna hear this, I have been waiting months for someone else to do this. lol I just wanna make sure im not gonna screw up the engine lol
so does the car feel faster or is it just louder?
are the holes on the bottom of the supercharger if so i got pics of my sc when i took it off and port and polished it. so you can show us what holes they are exactly.
stock

p&p


hope this helps
stock

p&p


hope this helps



