Slowbalt2000's SmallturboL61coupe Build
Thread Starter
Joined: 05-15-11
Posts: 27,333
Likes: 584
From: Livonia, MI
At the dragstrip

fastest pass because granny launch and limp mode problems

half of my time at ced was spend like this lol


Alan, riceburner, and myself

tuned on e47 now so im on this life...

my new coil overs

boost leak delete

finally got around to doing my g2 caliper paint. I HIGHLY RECOMMEND THIS STUFF. its the bomb.com

wire wheeled :P

after paint.


went back to crank windows but did the tan interior delete


little heat shield i made

re did all my engine harness conduit

2.5 bar wiring so my car actually sees boost now

few night time shots



enjoy!

fastest pass because granny launch and limp mode problems

half of my time at ced was spend like this lol


Alan, riceburner, and myself

tuned on e47 now so im on this life...

my new coil overs


boost leak delete

finally got around to doing my g2 caliper paint. I HIGHLY RECOMMEND THIS STUFF. its the bomb.com

wire wheeled :P

after paint.


went back to crank windows but did the tan interior delete


little heat shield i made

re did all my engine harness conduit

2.5 bar wiring so my car actually sees boost now

few night time shots



enjoy!
Thread Starter
Joined: 05-15-11
Posts: 27,333
Likes: 584
From: Livonia, MI
So for anyone who wants to use the zzp adapter harness to put an le5 throttle body on an l61, heres how its done..
Both connector views are as viewed on the adapter harness with the button facing up. Had to flip it around from what alldata gave me because i believe it was showing the diagram for the opposite side of the connector.
Both connector views are as viewed on the adapter harness with the button facing up. Had to flip it around from what alldata gave me because i believe it was showing the diagram for the opposite side of the connector.



Moderator

