zzp vs ottp mounts
i simply stated my experience. I will have better results when i run on the tc mounts and let you know. But just like tuning every car/driver is different
I'm gonna be taking my car to the track at the end of the month so lets see if the transmission holds up and if i get any wheel hop. I will be using DR's with low pressure so that should help.
I just like testing things and every high HP cobalt has mounts so i want to see if i really need them I'm gonna be taking my car to the track at the end of the month so lets see if the transmission holds up and if i get any wheel hop. I will be using DR's with low pressure so that should help.
I'm gonna be taking my car to the track at the end of the month so lets see if the transmission holds up and if i get any wheel hop. I will be using DR's with low pressure so that should help.
New Member
Joined: 06-07-09
Posts: 102
Likes: 0
From: Courtice, Ontario
I think experiance is what this comes down too though. Granted I dont know the extent but Mr. Powell and his shop helped build to original Grand Am cup cars/parts and/or the Time Attack car. I believe that his parts are better because of that experiance. Personally my trust and money will go to race shop that helped build the winning road race cars/parts. Thats my 2 cents.
Senior Member
Joined: 05-11-05
Posts: 6,298
Likes: 1
From: mississauga
loosen the bolts on the side engine mount before installing the mounts.
any hop you had should be eliminated.
this works.
I had a side engine mount years ago.
all it did for me was produce false knock.
might as well bolted a brick to my motor.
used it as a paper weight at occ shows and eventually sold it.
im stg two and vibes are minimal.
meh
any hop you had should be eliminated.
this works.
I had a side engine mount years ago.
all it did for me was produce false knock.
might as well bolted a brick to my motor.
used it as a paper weight at occ shows and eventually sold it.
im stg two and vibes are minimal.
meh
i didnt loosen the side mount first but back before john made his how to it said to loosen them after install and shake the motor then retorque. maybe ill hang onto them i duno
Senior Member
iTrader: (7)
Joined: 04-06-10
Posts: 3,702
Likes: 0
From: 6000ft on a Mountain in Colorado!
Okay, I don't imagine ZZP giving instructions with their products, since they haven't with anything I've ordered from them, but when I get my ZZP mounts, do I have to losen other mounts first then install them then tighten the ZZP then tighten the rest?
nah i was on street tires at 18psi cut a 2.0 flat almost a 1.9 60' and squeaked out a 13.1 @ 107 on the m62 no meth. I get what your saying and have tried alot of things. The one thing im going to do different this time around is have a set of slicks running low pressure to help absorb the hop. and at the time i was running my potenza RE11's which is my road race tire and im not gonna lie they have re enforced sidewalls for cornering so im sure that didnt help matters. but that run was done prior to my stage two mounts. I was stoked and went back with meth, the mounts and a few minor things looking to obtain my goal of a 12 sec pass on street tires and stock blower, but actually hopped worse. Im really consistant running the 1320 and my 60's, maybe your mounts like a different approach as to where they like being launched at. I generally leave at 1800- 2000rpms and slip the clutch while feathering the gas for tracshuns. i duno. Like i said though on the street i had no hop at all. Maybe i should try them after i install my bags in the rear slicks and a few other tricks i have in mind to run a mid to low 12 on my new tvs setup
Yea i was the only one iirc that was on the 2010 lsj and lnf throwdown list that made top ten on the stock m62 really wish i would have put slicks and a good suspension setup before the tvs but got a killer deal on it and couldnt pass it up. My slips are in a few threads floating around here and i believe on gmsc im still the fastest on the lsj stock m62 as well ( V8 2LATE on there) danew was with me and a bunh of locals when i ALMOST got a 12 on street tires. That was my goal but only got a few passes that day too.
Thread
Thread Starter
Forum
Replies
Last Post
2.0 LSJ Engine: aem wideband,zzp front mount exhanger,stock exchanger
n20saturn
Parts
7
Sep 30, 2015 12:26 AM
