Ah, well i got the whole shabang!...lol. NMU, Window Switch, WOT Switch, Purge, Blow Down Tube and Bottle Heater...lol.

 

What jets are you running?

 

who, me or blazin? I believe blazin said he is running a 60shot? im running a 100shot (50 in each intake)

 

I was asking you.

 

ah, yea im running a 100shot, so thats .16 fuel / .30 nitrous in each intake

 

i just got my kit and i have a 2.9 with #42s and 3in catless downpipe sundevil07 is gonna help me install it. is there anything we should be aware of during installation? i cant wait to install this!

 

iiunno how the cobalts handle nitrous so i could be wrong. But if you are running 2.9 and you wanna run nitrous, wont you need at least 60lb injectors?

 

nope. just richen up with the fuel jet. i ran a 2.9 with 42's on a 60 shot forever on the gm stage 2 tune

 

Yeah, lots of people think the wrong way about that. The nitrous adds it's own fuel, so whatever injectors you have are still fine.

As far as the 370 goes, you shoulda done what I did and made spacer plates for the TB's to mount the nozzles in. Much cleaner IMO and less risky than leaving them stuck in the intake pipes.

 

i was thinking about going that route incase i ever want to sell the intakes, now i cant cuz theres a hole in each one. Oh well, gotta learn somehow.

 

your setup is pretty much like mine what were your a/f with the gm tune at WOT im gonna get it loggede but not unitl the day after i install it so just curious

 

off nitrous it was 11.0AFR tapering down to 10.2AFR. on nitrous it would hold a steady 10.8AFR. this was before i tuned it myself

 

hmm thats not bad im doing just a 50 shot so i should be pretty safe right? because after we install my brother in his srt4 is getting tuned so we've talking about how were gonna smoke each other and i dont wanna wait to race him this has to go down as soon as we install it haha

 

50 shot is fine. i ran up to a 100 shot in my car

 

great i dont think im ready for a 100 shot ill work my way up but is there anything on the install we should be aware of or is it all plug and play i have the sniper wet kit (complete)

 

nothing too difficult. i forwarded sundevil07 the wiring schematic for the install. just remember to pull out the fuel pump relay to get rid of the fuel pressure in the rail and remove the fuel rail schrader valve fitting and screw the fuel line right into it

 

oh damn he already beat me to it lol well thanks for the info ill post some vids of it later

 

no problem. you are gonna **** yourself the first time you spray it. lol

 

haha i hope so because im tired of losing to sundevil07 lol

 

don't worry you will be near 300whp on that 50 shot with some good pressure in the bottle

 

yeah what kind of bottle warmer would you recommend i dont want to spend over $100 for a bottle warmer so whats a good cheap one lol

 

http://www.dynotunenitrous.com/store...p?idproduct=17

 

ok cool thanks alot we should have it done tomorrow and logged on friday to see what the a/f are until i get a wideband

 

you dont know how long ive been asking him to get this kit lol

 

yeah i know i know i got it now so im ready to go fast