Arizona BS Thread
you know i got you chris, gotta pay back all those hours tuning!
Last edited by sundevil07; Aug 22, 2011 at 06:52 PM. Reason: Automerged Doublepost
you only bake them to take the lenses off.Once off, you HAVE to clean ALL the old silicone out.Lay a 1/4 inch bead of silicone around the whole housing and put the lense back on.I used a ratchet strap(with a cloth in between) to make sure they were tightly sealed and let cure for 24 hours.
you only bake them to take the lenses off.Once off, you HAVE to clean ALL the old silicone out.Lay a 1/4 inch bead of silicone around the whole housing and put the lense back on.I used a ratchet strap(with a cloth in between) to make sure they were tightly sealed and let cure for 24 hours.
I only make sure its completely clean because the 1st time I didn't,and they leaked really bad.This is something you don't wanna take shortcuts on as it'll take even longer to clean all the silicone out that you just put on.I'm sure if you get most of it you'll be fine but I wouldn't want to do it twice again.Just take your time on them and they will turn out good.


