Cobalt SS Network

2.0L LNF Performance Tech 260hp and 260 lb-ft of torque Turbocharged tuner version.

Good turbo upgrade for lnf

   
Old Aug 18, 2011 | 10:45 AM
Share
  #76  
gmtech16450yz
Guest
 
Posts: n/a
Originally Posted by Boosted4
I just checked every single post in this thread, and theres ZERO mention of running Ethanol. I think you have this thread confused with the other Trifecta bash thread, which is titled "trifect air fuel ratio."
Oh Dear, what a silly clown I am! Sorry, sometimes it's hard for me to read with this big red ball on my nose.
Reply
0
Old Aug 18, 2011 | 01:13 PM
Share
  #77  
Knightwolf's Avatar
Knightwolf
Senior Member
 
Joined: 05-09-09
Posts: 826
Likes: 0
From: Edmonton
Originally Posted by gmtech16450yz
Oh Dear, what a silly clown I am! Sorry, sometimes it's hard for me to read with this big red ball on my nose.
Lmfao I'm running trifecta too.. have no problems, but ya.. that got me a good chuckle either way :P
Reply
0
Old Aug 18, 2011 | 02:43 PM
Share
  #78  
MS3 2 SSTC's Avatar
MS3 2 SSTC
Senior Member
 
Joined: 05-26-10
Posts: 932
Likes: 0
From: Edinburg, Tx
Originally Posted by gmtech16450yz
Oh Dear, what a silly clown I am! Sorry, sometimes it's hard for me to read with this big red ball on my nose.
can i book you for a party?? i need a clown for my nephews birthday party. LOL
Reply
0
Old Aug 18, 2011 | 05:13 PM
Share
  #79  
cobaltssoverbooster's Avatar
cobaltssoverbooster
Senior Member
 
Joined: 05-30-08
Posts: 819
Likes: 0
From: San Clemente, Ca
i am simply trying to say watch out. i am not confused with the other trifecta thread the tunes i corrected were for 91 pump no e and as with every tune be damn sure you know what your looking at in a recorded log before you say ok im happy. **** like what i saw sueaks by and gets shared and then lots of people have problems.
Reply
0
Old Aug 22, 2011 | 11:00 PM
Share
  #80  
vahdyx's Avatar
vahdyx
Senior Member
iTrader: (7)
 
Joined: 04-06-10
Posts: 3,702
Likes: 0
From: 6000ft on a Mountain in Colorado!
did i miss the review?
Reply
0
Old Aug 23, 2011 | 12:50 AM
Share
  #81  
MS3 2 SSTC's Avatar
MS3 2 SSTC
Senior Member
 
Joined: 05-26-10
Posts: 932
Likes: 0
From: Edinburg, Tx
Originally Posted by vahdyx
did i miss the review?
Nope!! I'm guessing gdubs will make his own thread
Reply
0
Old Aug 23, 2011 | 12:58 AM
Share
  #82  
gdubs's Avatar
gdubs
Senior Member
iTrader: (32)
 
Joined: 01-11-09
Posts: 2,078
Likes: 0
From: Rochester, NY
Yup. I'll make my own thread. Waiting to get on the dyno
Reply
0
Old Aug 23, 2011 | 01:51 AM
Share
  #83  
MS3 2 SSTC's Avatar
MS3 2 SSTC
Senior Member
 
Joined: 05-26-10
Posts: 932
Likes: 0
From: Edinburg, Tx
Originally Posted by gdubs
Yup. I'll make my own thread. Waiting to get on the dyno
Waiting for your thread!!! LOL
Reply
0
Old Aug 23, 2011 | 01:56 AM
Share
  #84  
FasterIsBetter's Avatar
FasterIsBetter
Senior Member
 
Joined: 05-15-10
Posts: 3,994
Likes: 2
From: South Charleston, WV
Originally Posted by gdubs
Yup. I'll make my own thread. Waiting to get on the dyno
LOL, HURRY UP! If you can get near or over 400whp on meth then I guess I'll have to get on that bandwagon as well!
Reply
0
Old Aug 23, 2011 | 10:21 AM
Share
  #85  
MastaShaKe_88's Avatar
MastaShaKe_88
Senior Member
iTrader: (5)
 
Joined: 08-24-10
Posts: 9,666
Likes: 0
From: Norf Cakalacky
Originally Posted by FasterIsBetter
LOL, HURRY UP! If you can get near or over 400whp on meth then I guess I'll have to get on that bandwagon as well!
^^this
Reply
0
Old Aug 23, 2011 | 10:40 AM
Share
  #86  
Empty Pockets's Avatar
Empty Pockets
Senior Member
 
Joined: 09-12-07
Posts: 1,022
Likes: 3
From: Rochester, New York
Originally Posted by gdubs
Yup. I'll make my own thread. Waiting to get on the dyno
still able to run e85 with the turbo upgrade??
Reply
0
Old Aug 23, 2011 | 12:22 PM
Share
  #87  
Fastgti69's Avatar
Fastgti69
Senior Member
 
Joined: 03-05-11
Posts: 2,570
Likes: 1
From: Encino,Ca
Originally Posted by Empty Pockets
still able to run e85 with the turbo upgrade??
I'm sure it can, as it all depends on the tuning.
Reply
0
Old Aug 23, 2011 | 12:40 PM
Share
  #88  
BYT*SS*TURBO's Avatar
BYT*SS*TURBO
Former Vendor
iTrader: (6)
 
Joined: 05-01-09
Posts: 5,973
Likes: 0
From: NEPA/North NJ
Def dyno it. I saw 45+ Maf Lbs on the Hahn 20G cars and they were making 360-370whp only. So that doesn't tell much IMHO. In for the results tho, always was curious how that wheel upgrade performs, never saw anyone in the Balt's with it.
Reply
0
Old Aug 23, 2011 | 01:15 PM
Share
  #89  
gdubs's Avatar
gdubs
Senior Member
iTrader: (32)
 
Joined: 01-11-09
Posts: 2,078
Likes: 0
From: Rochester, NY
Originally Posted by BYT*SS*TURBO
Def dyno it. I saw 45+ Maf Lbs on the Hahn 20G cars and they were making 360-370whp only. So that doesn't tell much IMHO. In for the results tho, always was curious how that wheel upgrade performs, never saw anyone in the Balt's with it.
Slapping it on the dyno tomorrow!!

Look for my full review tomorrow around 5pm
Reply
0
Old Aug 23, 2011 | 01:21 PM
Share
  #90  
BYT*SS*TURBO's Avatar
BYT*SS*TURBO
Former Vendor
iTrader: (6)
 
Joined: 05-01-09
Posts: 5,973
Likes: 0
From: NEPA/North NJ
We'll hold you to it :p LOL. GL!
Reply
0
Old Aug 23, 2011 | 01:51 PM
Share
  #91  
MS3 2 SSTC's Avatar
MS3 2 SSTC
Senior Member
 
Joined: 05-26-10
Posts: 932
Likes: 0
From: Edinburg, Tx
Originally Posted by gdubs
slapping it on the dyno tomorrow!!

look for my full review tomorrow around 5pm
yes!!!
Reply
0
Old Aug 23, 2011 | 03:29 PM
Share
  #92  
gdubs's Avatar
gdubs
Senior Member
iTrader: (32)
 
Joined: 01-11-09
Posts: 2,078
Likes: 0
From: Rochester, NY
Vince and I are still doing more tuning today and he is tweaking it. I'm at 36lbs of air and 15* timing and he says there is still more room!
Reply
0
Old Aug 23, 2011 | 03:43 PM
Share
  #93  
elecblue06's Avatar
elecblue06
Senior Member
iTrader: (1)
 
Joined: 03-19-07
Posts: 14,901
Likes: 1
From: newburgh,ny
Originally Posted by FasterIsBetter
LOL, HURRY UP! If you can get near or over 400whp on meth then I guess I'll have to get on that bandwagon as well!
the bnr will still be a better buy
Reply
0
Old Aug 23, 2011 | 07:08 PM
Share
  #94  
vahdyx's Avatar
vahdyx
Senior Member
iTrader: (7)
 
Joined: 04-06-10
Posts: 3,702
Likes: 0
From: 6000ft on a Mountain in Colorado!
Originally Posted by gdubs
Slapping it on the dyno tomorrow!!

Look for my full review tomorrow around 5pm
Aw that sucks, I'm gonna be in class! Well 5pm your time is like 3pm my time, so I may have a little time to read it lol.
Reply
0
Old Aug 23, 2011 | 10:07 PM
Share
  #95  
Fastgti69's Avatar
Fastgti69
Senior Member
 
Joined: 03-05-11
Posts: 2,570
Likes: 1
From: Encino,Ca
I'm down for dyno numbers!!! please try to get it with your rpm speed at 4th gear pull. maybe some AFR too! dynojet?
Reply
0
Old Aug 23, 2011 | 10:29 PM
Share
  #96  
zrated89's Avatar
zrated89
Senior Member
iTrader: (15)
 
Joined: 10-01-07
Posts: 4,184
Likes: 1
From: newportnews va
gm was talking lambda in case the afr guys didnt comprehend lol
Reply
0
Old Aug 23, 2011 | 10:44 PM
Share
  #97  
donkeyballs's Avatar
donkeyballs
Platinum Member
iTrader: (3)
 
Joined: 03-08-10
Posts: 4,221
Likes: 1
From: buffalo
Originally Posted by gdubs
Slapping it on the dyno tomorrow!!

Look for my full review tomorrow around 5pm
Do you have any before numbers?
Reply
0
Old Aug 24, 2011 | 04:24 AM
Share
  #98  
gdubs's Avatar
gdubs
Senior Member
iTrader: (32)
 
Joined: 01-11-09
Posts: 2,078
Likes: 0
From: Rochester, NY
Originally Posted by donkeyballs
Do you have any before numbers?
I do.

Originally Posted by Fastgti69
I'm down for dyno numbers!!! please try to get it with your rpm speed at 4th gear pull. maybe some AFR too! dynojet?
mustang
Last edited by gdubs; Aug 24, 2011 at 04:24 AM. Reason: Automerged Doublepost
Reply
0
Old Aug 24, 2011 | 05:36 PM
Share
  #99  
Mike08ss/tc's Avatar
Mike08ss/tc
Senior Member
iTrader: (1)
 
Joined: 03-25-09
Posts: 904
Likes: 0
From: Plattsburgh, NY
ANY numbers yet.....
Reply
0
Old Aug 24, 2011 | 06:20 PM
Share
  #100  
gdubs's Avatar
gdubs
Senior Member
iTrader: (32)
 
Joined: 01-11-09
Posts: 2,078
Likes: 0
From: Rochester, NY
I'm Writing up the review now.
Reply
0

Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -4. The time now is 04:18 AM.