I'm about to. I've got Jr finishing p&p the head and powder a few pieces. Hoping to b slapping everything on in 2-3 weeks time. U free and interested in coming to help install? Lol

 

me tune....

 

What...

You know how to maf tune

I've posted plenty of information on how to make a timing table.

Don't be afraid

 

So I sent my cams out thursday morning, they had them by friday afternoon and sent my new ones out and should be here Monday, now I just gotta talk to them about getting me shipping cost back at least....

 

hpt forum has a howto =p
along with RLF

 

i know, ive got the basics, thats not going to work for junior dyno comparing blowers though

 

sure it will

just get afr +/- 1%

set up a timing map and dyno

 

I got a set of 1000s

any body want bran new 80s?

 

Uh oh Steve's moved up to the big boy injectors. Are you moving away from your 100% Meth ways?

 

Unfortunately yes
I can't get enough methanol into the combustion without the use of water sadly.
If there were a way to meter methanol through the injectors w/ 91 octane; then maybe. I don't have the means or know how.

Water isn't combustible, excess cylinder pressure created, power is lost, and doesn't give me 100% access to the timing map at higher pressures. I was able to do crazy things with it though.

Ethanol ran as the primary fuel source is just so much better on the engine internally.

 

You can never get rid of the meff...

 

How much for the 80s Steve? Hook a brotha up. Do I even need them?

 

You will for the pulley you are running.
Injector duty cycle went well past 100 off methanol wen I ran the 3" on 60s.

 

Alright. I saw u tried PMing me. Let me clean out my box

 

 

Run 2 different tanks Steve. 1 post sc into manifold spraying 100% meth and then 1 pre spraying just enough water to cool

 

where all do you guys buy pulleys at? i have only found them at ottp so far

 

Smoothflow. But ottp is way cheaper iirc smooth flow is like $50

 

Oh come on stev i offered to make ur 100% meth dream happen.

 

Otto buys from smoothflow

 

Pulleyboys

 

Not anymore we don't. We have made TVS pulleys in house for almost 3 years. We stock 2.6,2.7,2.8,2.9 sizes at all times. We also have the lowest price.

 

But the most expensive shipping to Canada

 

yup 50

80 dollars and only go down to 3.2....
winner!! 45!!

 

Would you believe that we actually lose money on our ups standard to canada rates 90% of the time? Pm me if you feel the shipping quote is out of line and I will get a live quote for you.