I'm just buggin ya Josh haha. I usually use USPS when getting things from you or ZZP. With identical things yours will always be more to ship. Could be where you are ect. But your great deals and service always make up for it

 

anyone have a 2.8 pulley laying around? i am wanting to get one. i will have a 2.6 for trade if you want to do that

 

Whats my issue here? ZZP's stage 2 cams? both the intake and exhaust lobes are straight up and air is going out the exhaust and intake (I can feel it coming out of the injector port


20130522_153638_zpsa3fb1285.mp4 Video by robertmichaels199 | Photobucket

 

It's obviously getting passed the valves.... maybe bent valves in that cylinder?

 

Pull out the cams and test again. You may have gotten one of the sets of bad cams.

 

I guess my valve seals are bad, pulled the cams off and they still leak. Anyone have any other suggestion otherwise im going to order new valve seals and valves from ZZP tomorrow

 

Valve seals have nothing to do with air going past the valves. They keep oil from seeping down the valve into the cylinder. Have you actually measured your cams to make sure they weren't part of that bad batch? If you drove it long enough with the valves hanging open you probably burnt some valves out.

 

It still leaked air with no cams in... I guess I will order new valves and while im at it new seals...I suppose it would be a good idea to get the seats redone or not?

 

Right... So if it still leaks with no cams in then the valves are no longer sealing to the head. So either the valves are burnt out or the seats on the head are damaged. Either way the head has gotta come off. Inspect the damage before ordering anything.

 

I might as well order valves, if the seats are shot why put old valves on, they are cheap and this way I can have them here for my 4 day weekend

 

For the price why not just buy a used head? If the seats need to be cut then it would probably be cheaper to get a used head then change all your valves and cut the seats.

No down time either.

 

I have a great idea why don't you take the head to a machine shop and let them check it out it could be as simple as needing a valve job

now if it needs new valves guess what it will need a valve job

 

^this , get it magna flux or whatever they use now a days.

 

you forget who you're dealing with on this forum.

 

How dare any of you make logical sense!

 

so no one has one?

 

Just buy one from OTTP. They're cheap.

 

probably will. just seeing if someone has one

 

She finally running correctly with the new cams
Went for a drive before felt so good
Retune coming saturday

 

Good to hear man.

 

Anyone have a tvs for sale?

 

Yup this guy. For a good price too.

https://www.cobaltss.net/forums/part...oodies-297667/

 

So I think I might be getting some spark blowout.. Anyone want to confirm the symptoms to me?

 

All finished just gotta get a retune

 

And how does it feel?