Official TVS Thread!!!
It's surprising how much of the stuff they'll huff down. I was running 50/50 through a 7gph pre-blower and a 2.5gph underneath with the M62 and a 2.9" @13psi, and it probably could have used a little more.
9GPH is a decent amount for 13 psi.
It really depends on how you develop your timing table.
If your just keeping peak cylinder pressure conservative with 12-15* and slowly ramping to redline, less nozzle is needed.
If you wanna make the car very responsive and light a fire under it's ass, you'll need greater jetting.
Once you begin really pushing the tune to it's limits, you will find yourself limited by the 50/50 mixture on 91/93 octane. You'll need to step up the methanol mixture and run even greater jetting.
It really depends on how you develop your timing table.
If your just keeping peak cylinder pressure conservative with 12-15* and slowly ramping to redline, less nozzle is needed.
If you wanna make the car very responsive and light a fire under it's ass, you'll need greater jetting.
Once you begin really pushing the tune to it's limits, you will find yourself limited by the 50/50 mixture on 91/93 octane. You'll need to step up the methanol mixture and run even greater jetting.
Last edited by 100% METH; Jun 6, 2012 at 04:13 PM.
Long long time ago unfortunately
Connection with HOTROD magazine, one of the guys who worked on that article let me use it briefly.
Last edited by 100% METH; Jun 6, 2012 at 07:22 PM. Reason: Automerged Doublepost
Hey guys just picked up the AIS meth kit from Advice, I'm on TVS with 2.9, what size nozzle should I run with it? And is there anything else I should pick up. Its the trunk mount kit
