Bluelightning's Build V 2.0
Thread Starter
Joined: 03-16-10
Posts: 10,948
Likes: 33
From: Winnipeg, Manitoba
Sorry I just meant that as everyone under the sun just gives up on their blowers and goes turbo. Buuuut SC vs Turbo could go on forever and that's not what this thread is about.
New Member
Joined: 04-23-12
Posts: 162
Likes: 1
From: NC
You guys could stay at my place too if you decided I come out. Would be a fairly cheap trip.
Rallyyellow when I first bought my Balt I said to myself "I just want it to be a little faster than stock" lol. So an OTTP Stage 2 has lead me to where I am now. Good ol snowball effect! Not many people buy an SS/SC and say screw it I'm ditching the blower and going turbo. I'm not regretting what I've done and where I'm going at all. Personally I think going turbo is an easy way out. Will I break records no. But ill get props for a fast SC Balt and appreciate that more.
Rallyyellow when I first bought my Balt I said to myself "I just want it to be a little faster than stock" lol. So an OTTP Stage 2 has lead me to where I am now. Good ol snowball effect! Not many people buy an SS/SC and say screw it I'm ditching the blower and going turbo. I'm not regretting what I've done and where I'm going at all. Personally I think going turbo is an easy way out. Will I break records no. But ill get props for a fast SC Balt and appreciate that more.
Projekt didn't read my post properly but it's OK.
Senior Member
Joined: 06-03-07
Posts: 24,270
Likes: 1
From: Winnipeg, Manitoba, Canada
Not to mention all of the jobs lost by anyone who works for GM canada...
I don't think you understand very clearly how global trade works.
Thread Starter
Joined: 03-16-10
Posts: 10,948
Likes: 33
From: Winnipeg, Manitoba
Umm The gov't of Canada and the gov't of the province of Ontario did help bail GM out big time. Google it.
found this thread...
I thank you for not re-posting our video 
... Not many people buy an SS/SC and say screw it I'm ditching the blower and going turbo. I'm not regretting what I've done and where I'm going at all. Personally I think going turbo is an easy way out. Will I break records no. But ill get props for a fast SC Balt and appreciate that more.
Thread Starter
Joined: 03-16-10
Posts: 10,948
Likes: 33
From: Winnipeg, Manitoba
Run again this summer? Haha
You are going to go faster than high 9's or make 900+whp on your TVS set up? Lol. I know what you mean though. Go faster than most turbo guys on here like zrated would be a good feeling.
On a plus note ZZP contacted me today and my cams finally showed up! So they will be sending out my cams, NBS, revised shifter brackets (figure upgrade them while i'm in there) and new flywheel bolts. Head is getting sent to euthanasia this week for the works and valve springs. And I talked to kxrida last week and he said the motor should be able to get shipped out today or tomorrow. Fak I hope so...
You are going to go faster than high 9's or make 900+whp on your TVS set up? Lol. I know what you mean though. Go faster than most turbo guys on here like zrated would be a good feeling.
On a plus note ZZP contacted me today and my cams finally showed up! So they will be sending out my cams, NBS, revised shifter brackets (figure upgrade them while i'm in there) and new flywheel bolts. Head is getting sent to euthanasia this week for the works and valve springs. And I talked to kxrida last week and he said the motor should be able to get shipped out today or tomorrow. Fak I hope so...
How you planning on shipping the head?? So far I have a decent size box, two extra layers of cardboard in the bottom and the bottom ducktaped so it doesnt break through. What are you putting in the box just bubble wrap?
Thread Starter
Joined: 03-16-10
Posts: 10,948
Likes: 33
From: Winnipeg, Manitoba
Haven't gone that far yet. But it will be bomb proof when it's done lol. For sure have the whole head surounded in styrofoam.
Run again this summer? Haha
You are going to go faster than high 9's or make 900+whp on your TVS set up? Lol. I know what you mean though. Go faster than most turbo guys on here like zrated would be a good feeling.
On a plus note ZZP contacted me today and my cams finally showed up! So they will be sending out my cams, NBS, revised shifter brackets (figure upgrade them while i'm in there) and new flywheel bolts. Head is getting sent to euthanasia this week for the works and valve springs. And I talked to kxrida last week and he said the motor should be able to get shipped out today or tomorrow. Fak I hope so...
You are going to go faster than high 9's or make 900+whp on your TVS set up? Lol. I know what you mean though. Go faster than most turbo guys on here like zrated would be a good feeling.
On a plus note ZZP contacted me today and my cams finally showed up! So they will be sending out my cams, NBS, revised shifter brackets (figure upgrade them while i'm in there) and new flywheel bolts. Head is getting sent to euthanasia this week for the works and valve springs. And I talked to kxrida last week and he said the motor should be able to get shipped out today or tomorrow. Fak I hope so...
Giggity Giggity!
Thread Starter
Joined: 03-16-10
Posts: 10,948
Likes: 33
From: Winnipeg, Manitoba
lol