Pictures & Videos Your pictures, photoshops, and videos.

The Porsche 944

Old Feb 24, 2006 | 05:13 PM
  #151  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
It's about time for an UPDATE I think...

Lots of little things have happened since my last post.

I have found out that I am moving to Ottawa this spring... 1200 Km to Ottawa.

The 944 has to be able to Run by July 06 so I have to put the Paint on hold.

The original idea was to have the engine compartment the same color as the car and that was going to be done the same time the car was painted. Now I am in a rush a bit and I have found a solution that works for me as well.

I bought 100 Sq, Feet of B-Quiet Aluminum coated engine bay noise killer. It's Sticky on one side and aluminum on the other. When heated it is easily applied to the firewall with a roller and looks stellar.

So the entire engine bay will get lined with this material. That gives me the freedom to paint the car without having to take out the motor again once we arrive in Ottawa.

Here are some pictures of the Deadliner.





I got the badly abused center panel of the stock Recaro seats recovered. The center panel used to be Super 1980 cool ORANGE, but I think that the Black Looks super.



So You all remember the headlight conversion...



I installed two Hyper White LED bulbs in each as my DRL..







This is also finished..

The Driving Light Holes were removed, backed by fiberglass and filled level with bondo..


BEFORE



AFTER
Reply
Old Mar 6, 2006 | 07:40 PM
  #152  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
March 06 2006

First day of March Break.

I started with the engine bay.

The Rear part of the firewall is completely covered where the heater fans used to be. The Battery is installed again and once the firewall gasket is back, it will look great and be sealed. I have to return the wiper assembley later as it was removed to apply the Dynamat.

I will tackle the rest of the bay tomorow and post up pictures.

I picked up 4L of Contact cement to redo the headliner.

I need the Left kick panel with the Hood Pop lever.. Anyone got one for sale?
Reply
Old Mar 6, 2006 | 07:52 PM
  #153  
plyboy-illest's Avatar
Senior Member
 
Joined: 01-02-05
Posts: 5,183
Likes: 0
From: Toronto (woodbridge)
its a sweet ass car my uncle owns one and i love it...
Reply
Old Mar 7, 2006 | 09:31 PM
  #154  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
March 07 2006

This might make the entire Engine Bay Idea a bit clearer. It's far from finished, I am getting the first layer on and then I have a second roll to make it stronger in places and cover up some stuff to make it look nicer.



Reply
Old Mar 7, 2006 | 10:01 PM
  #155  
DJNateGnau's Avatar
Senior Member
 
Joined: 07-18-05
Posts: 5,014
Likes: 0
From: Brighton, IL
Looks good man...
Reply
Old Mar 9, 2006 | 04:16 PM
  #156  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
March 09 2006

Started major work on the interior. The Headliner is being replaced and starting from the front to the rear it got half done but then it started to be too cold to continue. Tomorow is supposed to suck so later for pictures..


Today I bid on an won a 944 S2 clutch as the original one that cam off my 944 was down to the rivets. Out on a limb a bit, the S2 clutch is diferent looking but I think that it will be compatible with the stock Flywheel and pressure plate that I have. The deal was too good to pass up..



E-Bay Link

I think for $60.00 it's worth it..

Up for bid is a clutch disk out of a 1989 S2. It is in good condition. It has pleanty of meat left on the disk. It was used less than 1000 miles. Shipping will be $15 in the continental USA. I DO NOT ship outside the US or to APO's
Reply
Old Mar 10, 2006 | 07:57 AM
  #157  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
March 10 2006

Here is a shot of the work.
You can get a feel for just how low and long this car really is.

The front frame is sitting over 3" Higher than normal because the motor etc... is not installed.
SEX ON WHEELS

Can't wait till it's done. It's a bit cold today so not much going on in 944 Land.

Reply
Old Mar 10, 2006 | 09:23 AM
  #158  
fire_cky's Avatar
Senior Member
 
Joined: 04-19-05
Posts: 890
Likes: 0
From: flemington, NJ
haha, that's a great picture. this and the one of you working on the mazda giving thumbs up.
Reply
Old Mar 12, 2006 | 07:33 PM
  #159  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
March 12 2006

What great weather to work outside!

Today I finished the headliner. The old one simply sucked and was ripped to ****. I used the same material that was used to recover the seats. I think it looks great, All the edges are covered and the material is thight and not coming down any time soon.

Here are some Shots..





I got the last of the heavy cracked and useless "Factory Noise Killer" off the inside of the car and replaced it with the same light weight aluminium that I have been doing the engine bay with. The Old stuff was 20 Years old and had split all over so it was useless and heavy. Not a good combination.

I'll post up some pictures of the finished product as I get them..

Here is the bare metal.

Reply
Old Mar 12, 2006 | 07:42 PM
  #160  
Cobalt_Supercharged's Avatar
Senior Member
 
Joined: 10-08-05
Posts: 5,295
Likes: 0
From: AZ
Looking good. Still wish I wasn't so far away so I could see it in person when done.

Here's an idea. Why don't you move to Arizona so you don't have to worry about the cold weather.
Reply
Old Apr 6, 2006 | 03:20 PM
  #161  
max_boost's Avatar
Senior Member
 
Joined: 10-08-05
Posts: 751
Likes: 0
From: Metro Detroit
Any updates?????????????????
Reply
Old Apr 6, 2006 | 05:49 PM
  #162  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
The ****** is going together this weekend if P7X can help out..

I'll post up some pictures of some stuff that happaned in the last bit soon..
Reply
Old Apr 6, 2006 | 10:52 PM
  #163  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
06 April 2006

Update.

Motor going in this weekend...

Interior Rebuilt....

Both doors open and the trunk works now..










Reply
Old Apr 6, 2006 | 10:55 PM
  #164  
Cobalt_Supercharged's Avatar
Senior Member
 
Joined: 10-08-05
Posts: 5,295
Likes: 0
From: AZ
I was wondering when the next update was gonna be. Looking good.
Reply
Old Apr 7, 2006 | 04:14 AM
  #165  
NGalaxyTimmyo's Avatar
Senior Member
iTrader: (1)
 
Joined: 08-31-05
Posts: 1,990
Likes: 1
From: Dearborn Hts, MI
I'm always looking forward for more updates!
Reply
Old Apr 9, 2006 | 06:44 AM
  #166  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
April 08 2006

Holy Crap,

My 10 Min job turned into a 3 Hour PITA.

Didn't really clean off the toothed driveshaft in the torque tube as well as I should have and the clutch didn't go on the shaft without alot of "Help"

Basically, it's all in there now and Pete (P7X) and I tested to make sure that it's all working fine.

1st gear and I manually rotated the crank, the car moved a bit
4th gear and I manually rotated the crank, the car moved a lot.

PERFECT!

Today, I'm going to start to put the parts on like a big German Lego set.

Peace!
Reply
Old Apr 11, 2006 | 08:03 PM
  #167  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
April 11 06

Updated picture of the Weekends work.

There are some Misc bolts holding stuff together that are the wrong length on the Fuelrail etc, and most of the sensors have to be hooked in but the hard part is done.

Reply
Old Apr 11, 2006 | 08:24 PM
  #168  
DJNateGnau's Avatar
Senior Member
 
Joined: 07-18-05
Posts: 5,014
Likes: 0
From: Brighton, IL
The procession of the kicking of asses, Has begun, Once more.
Reply
Old Apr 11, 2006 | 09:14 PM
  #169  
2K5SS/SC?'s Avatar
Senior Member
 
Joined: 07-08-05
Posts: 6,200
Likes: 0
From: Niceville, FL
I admire you hard work and craftsmanship Brian. That definately looks like "When you open a jewelry box, and you see the jewel inside." -- Chip Foose
I can't wait to see the finished product.
Reply
Old Apr 11, 2006 | 09:26 PM
  #170  
GTP's Avatar
GTP
Senior Member
 
Joined: 02-28-06
Posts: 950
Likes: 0
From: Greensburg (PA)
subscribing to this thread...good to see my hours on ebay looking for a 944 to restore has me knowing I am not the only one who suffers from this disease..!!!
Reply
Old Apr 12, 2006 | 05:20 AM
  #171  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
Originally Posted by 2K5SS/SC?
I admire you hard work and craftsmanship Brian. That definately looks like "When you open a jewelry box, and you see the jewel inside." -- Chip Foose
I can't wait to see the finished product.

Thanks alot. I guess all the little things that were done over the winter when put together look really good. I'm totally happy with how the 944 is going...
Reply
Old Apr 13, 2006 | 03:40 PM
  #172  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
Got some parts for the Fuel System today..





Reply
Old Apr 17, 2006 | 12:34 PM
  #173  
Brian MP5T's Avatar
Thread Starter
Senior Member
 
Joined: 11-14-05
Posts: 4,425
Likes: 0
From: www.mp5t.com
New Stuff for the 944 Project. This should finish the job off..























Reply
Old Apr 17, 2006 | 01:16 PM
  #174  
The Sunburst Kid's Avatar
Senior Member
 
Joined: 05-05-05
Posts: 1,643
Likes: 0
From: Somewhere
I just spent the last 45 min reading everything you have done from page one up untill now. That is awesome work man. You should be really proud of all you have accomplished. Looks like its all starting to pay off for you...
Reply
Old Apr 17, 2006 | 01:16 PM
  #175  
fire_cky's Avatar
Senior Member
 
Joined: 04-19-05
Posts: 890
Likes: 0
From: flemington, NJ
ahhh it's so close.
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 05:56 AM.