Bullseye Power Batmowheel for Ko4
12-02-2011, 05:02 PM
#176
Senior Member
Join Date: 06-03-07
Location: Winnipeg, Manitoba, Canada
Posts: 24,280
Likes: 0
Received 1 Like
on
1 Post
Im not sure when they are looking to do a dyno test on it, However my car is in storage right now and i can send them my stock wheel.
Fully bolted SS/TC, made 332 393 WHP/WTQ.
I'd be willing to do a test, downside is canada winter and storage.
Fully bolted SS/TC, made 332 393 WHP/WTQ.
I'd be willing to do a test, downside is canada winter and storage.
...where are the post batmo results! 
12-11-2011, 11:49 AM
#191
Senior Member
i am gonna call him tomorrow to arrange the shipping of mine i can't believe its been two weeks already lol
but yeah like i said before i won't be able to give an accurate dyno result for the before and after i mean i have gotten my car tuned and dyno'd before but couldn't do it again since its still apart.
but yeah like i said before i won't be able to give an accurate dyno result for the before and after i mean i have gotten my car tuned and dyno'd before but couldn't do it again since its still apart.
12-11-2011, 04:21 PM
#195
i am gonna call him tomorrow to arrange the shipping of mine i can't believe its been two weeks already lol
but yeah like i said before i won't be able to give an accurate dyno result for the before and after i mean i have gotten my car tuned and dyno'd before but couldn't do it again since its still apart.
but yeah like i said before i won't be able to give an accurate dyno result for the before and after i mean i have gotten my car tuned and dyno'd before but couldn't do it again since its still apart.
12-12-2011, 02:05 AM
#196
Member
Join Date: 12-18-10
Location: SouthEast
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
I dont know if this is still possible or not... but seeing as I am pretty much bone Stock... minus the GMS1 upgrade with a HP tune(BYT) on top of that... that's all I've done to it... I'm just working through some of the codes that have recently popped up on it and working out some smaller issues that I'm sure most of you have seen here and there... that said, I'd be willing to give this a try.. provided that I could basically do nothing more than just reflash the tune to the new wheel, keep the same boost and timing that I'm currently running with the HP tune... and get whatever results I'm gonna get...
I'm looking for "STABLE" power yes.. but not at the cost of making the car an unstable mechanical and or electrical mess... and I'd like to keep some MPG if that's possible too.. say in the low mid 20's would be great thanks... so if the Batmo Wheel is something that is stable power, keeps the car in a good place mechanically with about 21-23lbs of boost... I'd like to be considered for this upgrade...
I've never taken a turbo off of this car before .. so challenge #1... but even before that, if there is no more room for this, I'd understand...
I'm looking for "STABLE" power yes.. but not at the cost of making the car an unstable mechanical and or electrical mess... and I'd like to keep some MPG if that's possible too.. say in the low mid 20's would be great thanks... so if the Batmo Wheel is something that is stable power, keeps the car in a good place mechanically with about 21-23lbs of boost... I'd like to be considered for this upgrade...
I've never taken a turbo off of this car before .. so challenge #1... but even before that, if there is no more room for this, I'd understand...
12-12-2011, 08:05 AM
#198
Senior Member
i am gonna call him tomorrow to arrange the shipping of mine i can't believe its been two weeks already lol
but yeah like i said before i won't be able to give an accurate dyno result for the before and after i mean i have gotten my car tuned and dyno'd before but couldn't do it again since its still apart.
but yeah like i said before i won't be able to give an accurate dyno result for the before and after i mean i have gotten my car tuned and dyno'd before but couldn't do it again since its still apart.
Are you sending them your bnr? I ordered my bnr for my sky and getting that in soon, are they going to be making a wheel for you. I want to see your results and ill just send in my whole turbo. I'll then send in my stock(13k only) upgrade that and sell it. I'm very interested in the wheel and money is no issue. Let me know guys.
12-12-2011, 11:18 AM
#199
Senior Member
Are you sending them your bnr? I ordered my bnr for my sky and getting that in soon, are they going to be making a wheel for you. I want to see your results and ill just send in my whole turbo. I'll then send in my stock(13k only) upgrade that and sell it. I'm very interested in the wheel and money is no issue. Let me know guys.
12-12-2011, 02:33 PM
#200
I dont know if this is still possible or not... but seeing as I am pretty much bone Stock... minus the GMS1 upgrade with a HP tune(BYT) on top of that... that's all I've done to it... I'm just working through some of the codes that have recently popped up on it and working out some smaller issues that I'm sure most of you have seen here and there... that said, I'd be willing to give this a try.. provided that I could basically do nothing more than just reflash the tune to the new wheel, keep the same boost and timing that I'm currently running with the HP tune... and get whatever results I'm gonna get...
I'm looking for "STABLE" power yes.. but not at the cost of making the car an unstable mechanical and or electrical mess... and I'd like to keep some MPG if that's possible too.. say in the low mid 20's would be great thanks... so if the Batmo Wheel is something that is stable power, keeps the car in a good place mechanically with about 21-23lbs of boost... I'd like to be considered for this upgrade...
I've never taken a turbo off of this car before .. so challenge #1... but even before that, if there is no more room for this, I'd understand...
I'm looking for "STABLE" power yes.. but not at the cost of making the car an unstable mechanical and or electrical mess... and I'd like to keep some MPG if that's possible too.. say in the low mid 20's would be great thanks... so if the Batmo Wheel is something that is stable power, keeps the car in a good place mechanically with about 21-23lbs of boost... I'd like to be considered for this upgrade...
I've never taken a turbo off of this car before .. so challenge #1... but even before that, if there is no more room for this, I'd understand...