Uh, what?
It's a 10mm bolt.

 

I took the nut off the screw but it won't come up. I'll deal with that tomorrow.

 

Probably wouldn't be the first time

 

I was able to unhook it. I was afraid to touch the metal.

haha....

 

If the car's off, you have nothing to worry about.

 

Well, I reset the computer on Tuesday. I haven't had an engine light yet. If I make it to Saturday without a light, I'll declare victory.

 

Mmmm link doesn't work now...

 

just look at the picture

and cheers to you for searching

 

back from the dead haha, yeah it's really easy to locate and replace, picture is perfect

 

:

 

What I need is a part number to find it so I can buy it, already tested mine yesterday and I was able to blow some air though it..so its probably goin bad

The link for the part doesn't work

 

So what is the blue part outlined in the ***** drawing?
And how do you remove the purge solenoid without removing the bracket it sits on?

 

How can you tell when this has gone bad? im throwing the p0171 code also and i was seeing that the MAF has a different code so i figure this has to be the problem

 

Yeah I'm going to have to bump this thread back from the dead again. I've been throwing P0171 for months now and I have been using the Torque app and it says my Evap system is "Incomplete". I have replaced the MAF sensor and all the hose clamps on the intake. Many of the vacuum lines around the purge solenoid are cracked so I think its time to replace all that. Hopefully this finally cures it. Just snooping around for the right sized ID of tubing. And did you guys just buy vinyl tubing from Lowes or find silicone tubing somewhere? I saw the post above about using the 1/4" ID and 3/16" ID with a reducer to the hose "911" in that large diagram.

 

On the blue part i have the bottom outlet hose missing and im trying to figure out where is the other hose connector is pls help thanx

 

Whats the blue circle part called

 

I'd also like to know what the blue part is.... my recaro car seems to be missing it altogether... what does it control??? I noticed my boost gauge isn't working, would this do this?? I do know the gauges have a tendency to stop working... already had to replace in my silver car

 

Recaro seats and or G85 did not change anything in terms of the engine...

Not sure why you are missing anything. Did you buy it used?

 

yeah was purchased used... not there at all has some vaccum lines blocked off too from the bypass valve

 

Take a picture??

 

if you scroll up to the "*****" pic it's the blue circled one... my silver car has it lol... but I've had it since it was 2 years old