Well just spent $90 at vatozone on other crap I needed, already have tuning on the works

 

On the works?

No.

The tune is a sealed deal. Just have to get the money for it and have it written and then we are golden.



Got your email btw, forwarded to the God.

 

i went back 2 pages and i still dont see you have started anything on this....
i guess this wasnt the easy way out eh? should of stuck with the turbo lol

 

He is doing the install next week.

 

lol yeah what he said lol, utsadude will be coming to my home to tune my car on the first, the install starts this wednesday should be done by thursday night, and tuning will begin on the 1st of may, and im hoping for a dyno run on the second<<depends on how bad the clutch is slipping

yeah install beggin on the 29, ends on the 30th, tuning on the 1st

 

Good luck man. Keep us updated.

 

ok so here's a update:

my muffler arrived, this is being installed once the build is over, as i dont have the welder @my place anymore...

yes i went obx, a muffler is a muffler to me, and i have had good luck with them in the past

and i did some pre wiring for the pump today

wired the ground in, and the pwr is left open for now, made sure to leave enough slack in wires to reach anywhere in the bay, the wires, are twisted together, soder'd, shrink wrapped, and than wrapped in electrical tape

 

when the day...are you an auto 07?

 

the build starts in 5hrs will update with pics hourly-ish, im headed to bed now to rest before a full day of work

 

No he is 5 speed

 

just FYI, you have a little extra ground wire. I have my pump grounded on the frame closest to the pump. Its about a foot away maybe.

 

yeah i know, but i like to have some slack, ima just ground it on the fram where the headlight bracket is at




still working on stuff, about to put the tenrionor and idler pulley on, wish me luck

 

hey you polly wanna change your oil too while you have everything off. than you got like 3000 miles til you change it. that sc is like right in the way. just a suggestion.

 

nah its not in the way, if you have the right tools, you can do it with out removing the sc, i changed the oil on hazas car before, and the sc was sorta in the way, but with the right tool its not a issue, well i got the idler and the tensionor on, working on the alternator right now, i woudl say im about 30%done, at this rate ill be done by this ftaernoon

 

o i know its not hard. i just suggesting cuz you got everything off already.

 

yeah i k now what u mean but money is scarce right now :p anywhere onto more progress

got everything you see there done
-the alternator is ready to go
-the belt system is done(only need to have the belt put on
-the intake was a bitch to put on, but its on
-the TB wires are soders, shrink wrapped, electric taped, and wire loomed, and ready to go


to do list
-install balt
-run the pump inlet hose
-run the h/e outlet hose
-tighten the intake down
-fill the system back with dexcool
-fill the intercooling system with dexcoo/water/water wetter
-other misc things
-tune

looks like this will be done in the first day

 

Looks awesome man! I can not wait till Friday for me to start install

 

ON the intake you were suppose to take it from the bottom near the wheel well in to the engine bay. like put it threw the hole from the bottom and move the tube up threw the hole. cuz mine was a bitch to to get on

 

yeah the intake was a super tight fit with the vulcan resevoir there, man was it a bitch to get that intake threw, took me 5 whole mins of fails before i got it right, i know it goes thru the bottom i istalled the injen one in hazas car, just with the vulcan tank there, its a bit harder to get **** thru, its a near perfect fit, the tank touches the intake

 

yea i know wat you mean. i actually broke my sensor while puttin it on. lucky i had an extra laying around

 

jn2, how much have you spent on this build? im looking into s/c mine too.

 

looking good so far

 

the h/e is huge and is causing fitment issues, but nothing sheers wont settle, if the bumper gives me lip, im cutting them it off :p

~2,200 in total

 

I am so jealous. You will have to give more details when you have more time.

 

Looking good!!!