Autometer 2 and 3 gauge pods in stock and ready to ship . Yes , we also have them color matched in the factory light tan for additonal fees.
$59.99 plus $9.99 shipping in the US . Canada is an additional $9.99usd for shipping .
These are listed under PERFORMANCE , sub Category GAUGES
We have 30 , 3 gauge pods and 20 , 2 gauge pods in stock

color matched I LOVE YOU GUYS!!!!!!!!!!!! im gona order it right NOW!Also is that gona match the ss.sc. or it will only match the regular cobalts.

Autometer 2 and 3 gauge pods in stock and ready to ship . Yes , we also have them color matched in the factory light tan for additonal fees.
$59.99 plus $9.99 shipping in the US . Canada is an additional $9.99usd for shipping .
These are listed under PERFORMANCE , sub Category GAUGES
We have 30 , 3 gauge pods and 20 , 2 gauge pods in stock

how are you colour matching these pods? when they come in black

are these strictly for the Cobalt only?
or will they fit an Ion Redline too?

We are doing exactly what all the manufacturers do . We get the factory color matched plastic dye and we paint them . We have done this on many cars in the past and have no problems with it holding up and looking correct. ;)
These are for the cobalt . If they make it for the redline just give us a part number and i can get them as well .

what about the airbags on the side, wont that get in the way? or blow up

dunno if this was mentioned before but are they still air bag friendly

SWEET!!!! This is what we were waiting for!!

woo hooo....

sooo tempting!

Autometer 2 and 3 gauge pods in stock and ready to ship . Yes , we also have them color matched in the factory light tan for additonal fees.
$59.99 plus $9.99 shipping in the US . Canada is an additional $9.99usd for shipping .
These are listed under PERFORMANCE , sub Category GAUGES
We have 30 , 3 gauge pods and 20 , 2 gauge pods in stock
pics of color matched pods?

pics of color matched will be up tomorrow afternoon . We are painting them currently :cssNET:

pics of color matched will be up tomorrow afternoon . We are painting them currently :cssNET:
coolness! Make them matte finish like stock :):cssNET: :twothumbs

what is the charge going to be for color matching?

i like mine. but a suggestion is. down put the stock pod under it like directions say. besides it more than likely wont fit. just get a longer screw at Home Depot

Ours comes with the longer screw already . Yes i dont suggest you install it over the factory . Install it in place of the factory. We are trying for exact factory color match as much as possible .
We will also be offering complete pillar and gauge packages within the next week .

You guys are amazing, now i have three things on my list for you guys!!

I can't wait to see one installed.

awesome!

You know what would be even better? If we could find a gauges that looked liked the factory boost gauge. I like when my shit matches

Autometer 2 and 3 gauge pods in stock and ready to ship . Yes , we also have them color matched in the factory light tan for additonal fees.
$59.99 plus $9.99 shipping in the US . Canada is an additional $9.99usd for shipping .
These are listed under PERFORMANCE , sub Category GAUGES
We have 30 , 3 gauge pods and 20 , 2 gauge pods in stock
WHat are the chances of you guys making these for the Ion REDLINE. theres tons of guys who would want them. :D

You know what would be even better? If we could find a gauges that looked liked the factory boost gauge. I like when my shit matches
I have a factory boost gauge from the competition IRL if you want to buy it. i bought it from saturn parts.com just for the steering wheel mounted pod and latter tac. ill sell the gauge for 50.00 its brand new never used.

hey, if any of you guys get your hands on one of these Autometer pods and also have access to an Ion Redline, could you try a test fitment to see how close it is to fitting and/or matching the Ion pillar?
cuz if it's just a bit too long maybe we can trim it a bit to fit.
just a thought.
thanks.

I'm interested in seeing how well the loour matched pods look next to the factory!
if it's really close I'll grab one.

but that black from what I've seen from other pictures, doen't match the black that is the car right now :thumbsdow

as it says will be color matched.... I"m installing it friday night with an interceptor gauge... will post pics...

These pods will not fit the Ion.

They make carbon fiber pillar pods for the ion. Cvenom2122 has one on his redline.

when will you guys have pics of the color matched.

Check a few posts up... they're paintin em today... pics this afternoon.

I'm interested in seeing how well they match. you'd think that the black matched the black in the cobalt matched, but they don't.

I think they're ording the dye for the same gm color... so I don't see why it wouldn't match..

You guys are amazing, now i have three things on my list for you guys!!

I have to admit Cobalt-Addiction is coming out with some KICK ASS products.
I also have 3 on my list....:bye: :bye: bank account!! :)

I know... thats why I only deal with them now.... great products and great people... I'm at the shop at least once a week... I was there yesterday all day to get the h/c in and do some install pics for you guys... they do some really good work there and are trying to stay on top of the cobalt ss game... so if you have any product ideas... post em up and they'll see what they can do.
they have something else iin the works now too... should be a good boost... hopefully be ready for friday... I'll keep you guys posted,

I love you guys at coblat-addiction. What would I do without you. :twothumbs

Color matched pics are up on the site and in the very first post with the other pics in this thread. The color is very close to the pillar color and almost exact with the headliner color. The actual headliner /sunroof cover is what is under the pods to show how close the color is . The pillar in the middle is the actual factory pillar to show actual color. The pillar color is difficult because it is not a true color , it has black/grey fibers into the actual pillar. It is not a painted color. For that reason we actual did a dust spraying of a medium grey overspray over the factory color and got a very close match. The pics we posted are so you can tell the color difference the most . Outside in the light they look exact. The good thing though is the other factory pillar is not right next to this one when installed so you wouldnt notice the difference in color.
We couldnt even order the color we had to make it today which took some time and a whole bunch of test sprays. Hope you all enjoy !!! I think they look Great in person .

looks good I'm takin 1 fri if the interceptor is in

How are we supposed to order these as the pod link in your site is not functional?

email sent

Autometer 2 and 3 gauge pods in stock and ready to ship . Yes , we also have them color matched in the factory light tan for additonal fees.
$59.99 plus $9.99 shipping in the US . Canada is an additional $9.99usd for shipping .
These are listed under PERFORMANCE , sub Category GAUGES
We have 30 , 3 gauge pods and 20 , 2 gauge pods in stock

DANG!!! I WANT A TRIPLE GAUGE POD SOO BAD!!!! I wish i had control. Now i gotta order it.

The pod buy it now does work i just checked it all out ...people have been ordering them without any problems . If the problem continues for you please contact me .

The pod buy it now does work i just checked it all out ...people have been ordering them without any problems . If the problem continues for you please contact me .
It still didn't work for me but it worked through the email you sent.

Thanks,
Rod

Bump

hehe i just ordered a triple gauge pod :nuts:

Really nice, good work.

anyone get a color matched one yet? it doesn't look like much of a match from the pictures.

then again with a thousand watermarks on every picture how are you supposed to see anything in those pictures.

I ordered a color matched. I have faith in cobalt-addiction that it looks good. :cssNET:

It says on your website that they fit 2Dr, SS and 4Dr?

Are there any differences in the 4 Dr one, cause we tried to put the SS a Pillar in my 4 door and it wouldn't fit?

Just wanted to make sure it would fit the four door for sure, very interested in these!

From what we have tried these do fit the 4 door model . The inside of the stock pillar is the only difference in fitment . These do not have the stock inner support thus they will work . We ordered every different pillar made for the cobalt and tried them all in the 2 door ss and they all worked fine once the inside supports were removed.

Ordered mine earlier today - color matched. Can't wait to get it :) . Now I'll finally have a place to put my Interceptors.

i will be ordering these soon, but i want to see the package deal with the gauges first, like what a price would be with the autometer cobalt series full sweep boost,vacuum gauge, oil pressure gauge, tranny temp gauge, and narrow band air fuel ratio gauge, of course in a 3 pod tan matched pod and the 4th gauge will be going into that compartment on the left of the steering wheel, on a side note you guys should make something that lets us custom fit a gauge in that spot for those of us that want more than 3 gauges...just an idea

i just picked up teh 3 gauge piller pod form cobalt-addiction... fits like stock and it is airbag friendly... thanks kenny

-drew

the color is spot on also
-drew

installed pics :)

installed pics :)
x2, please

i will post the install pics tomm. in the lite.. i dont have gauges in them yet.. i just ordered them and next week i'll order the aeroforce gauge... i found an awesome site that gave me a great deal on gauges.. www.egauges.com check em out.. the gauges i wanted from sumit were $65 a peice and on that site they are $35.. the same ones

-drew

how long do these normally take for shipping?.....i'm really anxious to get it:nuts:

.......bump.........

i dunno.. the shop is down teh street from me soo i just went there and got emm..
-drew

they are all in stock and should be out and to you within a week. remember Sat and Sundays we are closed and dont ship those 2 days.

hahaha.... but you still get emails... people will never learn.....

i will post the install pics tomm. in the lite.. i dont have gauges in them yet.. i just ordered them and next week i'll order the aeroforce gauge... i found an awesome site that gave me a great deal on gauges.. www.egauges.com check em out.. the gauges i wanted from sumit were $65 a peice and on that site they are $35.. the same ones

-drew
PICS in the car! :)

hahaha.... but you still get emails... people will never learn.....

ah it happens thats what im here for.

I take it install instructions are included? What does the install involve? Thanks

I take it install instructions are included? What does the install involve? Thanks
remove 1 bolt at the top, pull the couple clips with the pillar and lift out....eassssy!:twothumbs

installed pix?

+2 :)

sorry been busy here are some pics of them istalled... my gauges come in today like i said the color is a perfect match
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00629.jpg
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00631.jpg

give me another day and i'll have the gauges in.. just been busy with work.


-drew

sorry been busy here are some pics of them istalled... my gauges come in today like i said the color is a perfect match
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00629.jpg
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00631.jpg

How long did it take for you to get yours in the mail? I ordered mine last friday.

i didnt have to wait the shop is down the street from me.. i think i was one of the first to get them..

-drew

damn...lol.....i'm really impatient, and i think i am going to go nuts :nuts:

damn dude looks good.... can't wait to install mine

does the color/pattern honestly look like the stock pillar because in the pics provided by CA you can clearly see a difference..?

its as close as possible... the way they painted it it looks awesome.. the stock pillier is molded out of that color plastic... oh and i just installed 2 of my gauges... i'll up load pics tonight

-drew

Wow the color match looks super!

is that a big ugly screw that i see in the pic

These pods will not fit the Ion.

They make carbon fiber pillar pods for the ion. Cvenom2122 has one on his redline.
have you checked out the price on those pods you speak of? yeah at 255 bucks carbon fiber or not I just cant convince my self taht its worth it at that price.

so how do they work with the side airbags? I want one

the air bag is not in the pillier.. it is above the door the onlything in the pilier is a hose and a wire that runs down behind the dash and it is not in the way... more than enough room to for wireing and other things.. honestly it is empty behind there.. it tooke about 2 min to install, then the gauges wich all depends on what you get.. i have air tem & a/f gauge next week i have to pick up my interceptor for the third

-drew

For some reason i becuase i live in Canada.... I cant add the extra 9.99us for shipping

so ill pay for the pod and initial 9.99 shipping and ill send you another 9.99 right after.,..


thanks..

my Tripple Is Ordered....

good shit.... I def can't wait to get mine

I wish that screw could be covered by the stock cover for that same screw.

god DAMN that looks hot!!!!! (other than that big ass silver screw)

any alternative to that redneck mounting system seen in those pics?

other than that the pillar/color looks amazing.

yeah that screw ruins it, other than that its hot

god DAMN that looks hot!!!!! (other than that big ass silver screw)

any alternative to that redneck mounting system seen in those pics?

other than that the pillar/color looks amazing.
get your own polished screw or a black anodized one ;):cssNET:

yea, i'll find a way to cover it.. even if i have to paint the screw head to blend it in.

-drew

http://img.photobucket.com/albums/v219/sxemokidxe/DSC00636.jpg
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00639.jpg
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00637.jpg

that looks good.....I can't wait till' i get mine. :nuts:

bump

hey you guys the autometer cobalt guages are very close to the stock guages! looks like they are only missing the gray stripe around the outside. they light up blue. here's the link...http://www.autometer.com/cat_gaugelist.aspx?sid=4&opid=1&szid=2

thats cause the stock cobalt boost gauge is an autometer

i know i was just letting everyone know so they could match as close as possable if they wanted

why does it look like the gauge pod sticks out and is not flush, is it just an illusion?

http://img.photobucket.com/albums/v219/sxemokidxe/DSC00636.jpg
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00639.jpg
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00637.jpg

That looks AMAZING you sexy beast you!!! (the car that is, not you)
What is your 3rd gauge gunna be?

sorry been busy here are some pics of them istalled... my gauges come in today like i said the color is a perfect match
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00629.jpg
http://img.photobucket.com/albums/v219/sxemokidxe/DSC00631.jpg
Did you replace the factory one or install it over top of the factory one?

if u look inside the pods you can tell its replaced, not covered

bump

I installed mine this past Friday with a pair of Interceptors and the stock boost gauge. I should have pictures posted by EOD on Wednesday.

Overall, the installation went smoothly, and the color match is near perfect. No one could tell the difference between it and the passenger side pillar. The screw does make it look pretty crappy, but I plan on drilling the hole out a bit and securing a washer to the back of the a-pillar to put a different screw through (so it'll be flush with the rest of the pillar).

how long does shipping take on the gauge pods?

I plan on drilling the hole out a bit and securing a washer to the back of the a-pillar to put a different screw through (so it'll be flush with the rest of the pillar).


but that you should not have to do.

they have them in stock and will ship as soon as you order... unfortunatly that the way all of em are designed so we gotta figure out a fix for it... I'll be pickin mine up today or tomorrow... I'll keep you posted.

well, i ordered mine almost 2 weeks ago, thats the only reason i ask :)

^^^^ do you have an order confirmation.
i can see whats going on with it.
2 weeks...should have already been shipped and gotten to you...unless of course you ordered on a weekend at which point we wouldnt ship till monday. at any rate PM me the info and ill see what i can do to see whats going on and make sure its being sent to the correct address.

I never recieved an order confirmation number. I did pay with pay-pal
.

well then you sent someone money for no reason. you shoulda got a confirmation number.

naw, i have a receipt, and it even says paid to cobalt-addiction.com

^^^ yes exactly...go back into your paypal and see who the payment was sent to. when you order through us you get an automated order number which is generated through paypal. that then is printed out at our location once your payment has been processed through paypal.

the problem may be that a. your address linked to paypal was unconfirmed...usually happens if your credit cards address and shipping address are different.
or b. your card was not accepted (ie declined,etc) and didnt go through as a payment.

if its been 2 weeks, check you statement for your credit card used. see if they ever debited out the money. if so then def. contact paypal to see where your payment has gone.

you should get a confirmation to the email that you registered your paypal account.
so if you regularly use aol or something but set up paypal through yahoo for example...you would not get an email to your aol address even if its your prominant email account.

also upon shipment, our shipping company generates your tracking number which you will get through that same email...it also lets you know where to go to check on the shipment process.

i guess i submitted the payment on aug. 10, and you said it takes 2 weeks, so its probably on the way.

^^^ yes exactly...go back into your paypal and see who the payment was sent to. when you order through us you get an automated order number which is generated through paypal. that then is printed out at our location once your payment has been processed through paypal.

the problem may be that a. your address linked to paypal was unconfirmed...usually happens if your credit cards address and shipping address are different.
or b. your card was not accepted (ie declined,etc) and didnt go through as a payment.

if its been 2 weeks, check you statement for your credit card used. see if they ever debited out the money. if so then def. contact paypal to see where your payment has gone.

you should get a confirmation to the email that you registered your paypal account.
so if you regularly use aol or something but set up paypal through yahoo for example...you would not get an email to your aol address even if its your prominant email account.

also upon shipment, our shipping company generates your tracking number which you will get through that same email...it also lets you know where to go to check on the shipment process.

It hasn't been a full two weeks...I know I had money in my account, and it says confirmed address. So like I said, its more than likely on the way :)

danm then hold your horses. the lady said 2 weeks. lol.

ok...good. you had me a little worried. lol. just let me know when it arrive. ;-)

lol, i know, i just asked how long average shipping takes. but, i will admit, i am a little impatient :nuts:

aren't we all... thats why I'm glad I live near them...

yea, there's nothing near wisconsin.

well you do got cheese.... lol

and brett favre :rolleyes: :lol:

hey Donna...i ordered the three guage pod and i know they fit the 2 1/16" guages but will the 52MM guages fit in them without much work as well? thanks for the help

hey Donna...i ordered the three guage pod and i know they fit the 2 1/16" guages but will the 52MM guages fit in them without much work as well? thanks for the help
they are almost the same....

2 1/16th= 2.0625
52mm=2.0472

they will fit fine, these gauge pods use interference fit, so they are already smaller than the recommended size...

nice!!!! check out these guages i found. they are all similar to these they look pretty clost to the stock guages! http://www.acautotechnic.com/main/products/prod_GR6000.htm

el bumpo

So just being curious. I live in Delaware. If my order went through this past friday the 18th. Would I still be waiting 2 weeks or would it be a shorter period since im closer to NY?

depends on what shipping you wanted... if it was just standard ground (which is the standard shipping) it should take a little less than that....

depends on what shipping you wanted... if it was just standard ground (which is the standard shipping) it should take a little less than that....

yeah i wasn't sure. I used to do shipping here at work but haha i decided to get away from that. ALso do you know weather they use FedEx or UPS? Im gonna guess FedEx?

I'm pretty sure they use fed-ex or usps/// can't remeber when I'm down there so many different trucks in and out

I'm pretty sure they use fed-ex or usps/// can't remeber when I'm down there so many different trucks in and out


hahaha yeah i know that feeling. but thanks for your help. hopefully i might get it as early as friday. but i don't think so. ill take pics too when i get it and install it :cool:

def show it up

I jsut noticed this hahah sorry. but i never had a tracking nnumber emailed to me either. Just an email from paypal. Is this because the order hasn't been processed and shipped out yet?

pm donna.... she might know....

Just wanted to know if my order was shipped out or now.
order confirmation number is 59X984174V5616214

that is the number paypal gave me when i paid.. i didnt get a number from your site


thanks...

bump

^^ sent message to kenny to see if it has shipped
usually we do a big shipment on fridays. chances are its going today

awsome cause i have been ordering gauges too.,.....

Got mine yesterday. looks good. Takes like less then a min maybe 20 seconds to change and put in haha. Sooo easy. Thanks for all the help Donna! :-)

well its been a while since i payed for the gauge pod, and i am wondering if it has been sent out yet, if there is a tracking number or sumthing

Just wanted to know if my order was shipped out or now.
order confirmation number is 59X984174V5616214

that is the only number i got it is from paypal.

so all of you who are odering these guages.....where are you gettin the guages that actually look exactly like our stock boost gauge??

also are most of you keeping the stock boost gauge and then what other two guages are you putting in and what site are you getting them from??

thanks any help would be nice
thanks
max

I kept the stock boost gauge and added my two Aeroforce Interceptors. Click the camera link for a couple semi-fuzzy pics that will at least get the point across.

And I got the gauges directly from Aeroforce although they are available from at least a couple of the supporting vendors on here (including cobalt-addiction where I got the pillar complete with color-matching).

I kept the stock boost gauge and added my two Aeroforce Interceptors. Click the camera link for a couple semi-fuzzy pics that will at least get the point across.

And I got the gauges directly from Aeroforce although they are available from at least a couple of the supporting vendors on here (including cobalt-addiction where I got the pillar complete with color-matching).


how long did it take for you to get thouse gauges?? Im still waiting on mine thats why i ask. Also.....gauges look good in your car :cssNET:

oh yeah installed mine friday w/ my aeroforce and AEM wideband (had to modify to fit) looks great... screw is barely noticable so I don't know what the big fuss was.... but if you paint it to match it won't stand out at all.. also I was toying with the idea of cutting out the mounting point from the stock pillar, using a holesaw to match the hole size and just glueing it it so I could use the stock bolt.

I Received Mine Today
For Gauges, and i think ill be getting more then 3 (as there are so many i want) ill find a place to put them,

right now
Autometer Cobalt Boost Gauge 0-35psi
Aeroforce Interceptor (ordeing)
probrbaly a AEM wideband Air/Fuel

would like exhaust gass temp, mabye trans temp, so many not enouh room

C/A'S coming out with a dash mount 2 guage kit soon.... that should help you out alittle (will be to the left and right of gauge cluster)

hmmmm maybe mine will be there when i get home today....lol pleasseeee be there hahaha.

I Received Mine Today
For Gauges, and i think ill be getting more then 3 (as there are so many i want) ill find a place to put them,

right now
Autometer Cobalt Boost Gauge 0-35psi
Aeroforce Interceptor (ordeing)
probrbaly a AEM wideband Air/Fuel

would like exhaust gass temp, mabye trans temp, so many not enouh room

Did you have to pay the extra $12 USD shipping to Canada? I ordered the same thinf as you and I got this email saying I have to pay an additional $12 USD. I don't have a problem with that but when I try to get back into the website under "Contact Us' and try to pay for "Addtional Shipping Charge", I keep getting the same error msg. Did you have the same issues?

Thanks, Ang

I dont see a link for this on your website. Are you currently out of stock?

check under guages, i think kenny may have out them in the wrong section by accident

DONNA! Buddy, pal of ours. How about a christmas Group Buy on these gauge pods??

A lot of us just bought gauges from the NGASales group buy. We all need gauge pods now.

Hint Hint, so now would be a good time for a gauge pod group buy. :cssNET: